Influence of Adhesive Bonding on the Surface Accuracy of Flat Optics: A Mechanistic Analysis and a Quantitative Approximation
Photonics · 09.02.2026 · 13 (2) · 166
DOI: 10.3390/photonics13020166 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics, online erschienen am 09.02.2026. Verfasst von Jian Xiong und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Engineering and Physical Sciences Research Council, Science and Technology Facilities Council.
Abstract (Originalsprache)
Surface accuracy is a crucial evaluation criterion for the life cycle performance of optical components. Throughout the assembly process, the optical surface undergoes deformation due to applied assembly stresses, causing the actual surface profile to deviate from the intended design. The key to the quantitative optimization of the adhesive bonding assembly process is to elucidate the quantitative coupling mechanism between assembly stress and optical surface deformation and to establish a corresponding quantitative relationship. To address this, a comprehensive study into the optical surface deformation of multi-point adhesive bonded flat optical components is presented. Firstly, the coupled influence mechanisms governing optical surface deformation are analyzed considering both the components properties and assembly parameters, and this mechanistic analysis includes dimensionless modeling, boundary conditions analysis, and reliable design requirement analysis. Secondly, based on the understanding of mechanisms, a quantitative approximation method is developed to predict the deformation patterns within the critical central region (50% aperture) of optical components subjected to multi-point bonding. Finally, the quantitative approximation for the assembly-induced surface deformation is experimentally validated. Through this research, the surface deviation during the multi-point adhesive bonding assembly of flat optical components can be effectively approximated, holding significant importance for further imaging quality prediction and assembly parameters optimization during assembly process, and facilitating a further performance improvement for optical instruments.
Förderung
- National Natural Science Foundation of China
- Engineering and Physical Sciences Research Council
- Science and Technology Facilities Council
Zitieren
APA
Xiong, J., Su, T., Chen, X., Zhang, Z., Zeng, W., Lou, S., Qin, Y., Zhong, W., Scott, P. J., & Jiang, X. J. (2026). Influence of Adhesive Bonding on the Surface Accuracy of Flat Optics: A Mechanistic Analysis and a Quantitative Approximation. Photonics, 13(2), 166. https://doi.org/10.3390/photonics13020166
Vancouver
Xiong J, Su T, Chen X, Zhang Z, Zeng W, Lou S, et al. Influence of Adhesive Bonding on the Surface Accuracy of Flat Optics: A Mechanistic Analysis and a Quantitative Approximation. Photonics. 2026;13(2):166. doi:10.3390/photonics13020166
BibTeX
@article{Xiong2026,
author = {Xiong, Jian and Su, Taiyu and Chen, Xiao and Zhang, Zhijing and Zeng, Wenhan and Lou, Shan and Qin, Yuchu and Zhong, Wenbin and Scott, Paul James and Jiang, Xiangqian (Jane)},
title = {Influence of Adhesive Bonding on the Surface Accuracy of Flat Optics: A Mechanistic Analysis and a Quantitative Approximation},
journal = {Photonics},
year = {2026},
volume = {13},
number = {2},
pages = {166},
doi = {10.3390/photonics13020166}
}
EUVIMED