EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Semiconductor Wafer Flatness and Thickness Measurement Using Frequency Scanning Interferometry Technology

Weisheng Cheng, Zexiao Li, Xuanzong Wu, Shuangxiong Yin, Bo Zhang, Xiaodong Zhang

Photonics · 30.06.2025 · 12 (7) · 663

DOI: 10.3390/photonics12070663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 30.06.2025. Verfasst von Weisheng Cheng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon (Si) and silicon carbide (SiC) are second- and third-generation semiconductor materials with excellent properties that are particularly suitable for applications in scenarios such as high temperature, high voltage, and high frequency. Si/SiC wafers face warpage and bending problems during production, which can seriously affect subsequent processing. Fast, accurate, and comprehensive detection of thickness, thickness variation, and flatness (including bow and warpage) of SiC and Si wafers is an industry-recognized challenge. Frequency scanning interferometry (FSI) can synchronize the upper and lower surfaces and thickness information of transparent parallel thin wafers, but it is still affected by multiple interfacial harmonic reflections, reflectivity asymmetry, and phase modulation uncertainty when measuring SiC thin wafers, which leads to thickness calculation errors and face reconstruction deviations. To this end, this paper proposes a high-precision facet reconstruction method for SiC/Si structures, which combines harmonic spectral domain decomposition, refractive index gradient constraints, and partitioning optimization strategy, and introduces interferometric signal “oversampling” and weighted fusion of multiple sets of data to effectively suppress higher-order harmonic interferences, and to enhance the accuracy of phase resolution. The multi-layer iterative optimization model further enhances the measurement accuracy and robustness of the system. The flatness measurement system constructed based on this method can realize the simultaneous acquisition of three-dimensional top and bottom surfaces on 6-inch Si/SiC wafers, and accurately reconstruct the key parameters, such as flatness, warpage, and thickness variation (TTV). A comparison with the Corning Tropel FlatMaster commercial system shows that this method has high consistency and good applicability.

Förderung

  • National Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Cheng, W., Li, Z., Wu, X., Yin, S., Zhang, B., & Zhang, X. (2025). Semiconductor Wafer Flatness and Thickness Measurement Using Frequency Scanning Interferometry Technology. Photonics, 12(7), 663. https://doi.org/10.3390/photonics12070663

Vancouver

Cheng W, Li Z, Wu X, Yin S, Zhang B, Zhang X. Semiconductor Wafer Flatness and Thickness Measurement Using Frequency Scanning Interferometry Technology. Photonics. 2025;12(7):663. doi:10.3390/photonics12070663

BibTeX
@article{Cheng2025,
  author = {Cheng, Weisheng and Li, Zexiao and Wu, Xuanzong and Yin, Shuangxiong and Zhang, Bo and Zhang, Xiaodong},
  title = {Semiconductor Wafer Flatness and Thickness Measurement Using Frequency Scanning Interferometry Technology},
  journal = {Photonics},
  year = {2025},
  volume = {12},
  number = {7},
  pages = {663},
  doi = {10.3390/photonics12070663}
}
Kostenlos starten →