EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of a Continuous-Zoom 2D/3D Microscope with High Zoom Ratio and Full Field of View

Yangshen Gong, Fei Li, Jiebo Huang, Jiaying He, Feihong Yu, Tingyu Zhao

Photonics · 16.06.2024 · 11 (6) · 564

DOI: 10.3390/photonics11060564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 16.06.2024. Verfasst von Yangshen Gong und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Zhejiang Provincial Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A four-group mechanically compensated continuous-zoom microscope is proposed and designed based on the theory of continuous zoom. The system addresses the limitations of traditional continuous-zoom microscopes, including a small zoom ratio, a short working distance, and the loss of details during 2D–3D switching. The system has a magnification of 0.6×~6.0× under two-dimensional observation, adapts to two-third-inch sensors, has a working distance of 130 mm, and adds a 360-degree rotatable beamsplitter for three-dimensional full-field-of-view observation. The magnification, numerical aperture, and sensor dimensions remain unchanged under both two-dimensional and three-dimensional observation. The design results demonstrate that the system is capable of achieving a high zoom ratio of 10× while maintaining a high level of imaging quality in both two-dimensional and three-dimensional modes. The MTF curves for each magnification are in close proximity to the diffraction limit, the spot diagrams are smaller than the airy disk range, and the zoom cam curves are smooth with no inflection points. Furthermore, the system negates the visual discrepancies and loss of detail that arise when switching observation modes due to alterations in system magnification and numerical aperture, thereby broadening the scope of applications for continuous-zoom microscopes.

Förderung

  • National Natural Science Foundation of China
  • Zhejiang Provincial Natural Science Foundation of China

Zitieren

APA

Gong, Y., Li, F., Huang, J., He, J., Yu, F., & Zhao, T. (2024). Design of a Continuous-Zoom 2D/3D Microscope with High Zoom Ratio and Full Field of View. Photonics, 11(6), 564. https://doi.org/10.3390/photonics11060564

Vancouver

Gong Y, Li F, Huang J, He J, Yu F, Zhao T. Design of a Continuous-Zoom 2D/3D Microscope with High Zoom Ratio and Full Field of View. Photonics. 2024;11(6):564. doi:10.3390/photonics11060564

BibTeX
@article{Gong2024,
  author = {Gong, Yangshen and Li, Fei and Huang, Jiebo and He, Jiaying and Yu, Feihong and Zhao, Tingyu},
  title = {Design of a Continuous-Zoom 2D/3D Microscope with High Zoom Ratio and Full Field of View},
  journal = {Photonics},
  year = {2024},
  volume = {11},
  number = {6},
  pages = {564},
  doi = {10.3390/photonics11060564}
}
Kostenlos starten →