Difference in Tableting of Lubricated Spray-Dried Mannitol and Fluid-Bed Granulated Isomalt
Pharmaceutics · 04.12.2025 · 17 (12) · 1566
DOI: 10.3390/pharmaceutics17121566 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pharmaceutics, online erschienen am 04.12.2025. Verfasst von Valentyn Mohylyuk und 7 weiteren Autor:innen. Beteiligte Einrichtung: Leading Research Group, Faculty of Pharmacy, Riga Stradiņš University, LV-1007 Riga, Latvia. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The European Union Recovery and Resilience plan and the Latvian state budget.
Abstract (Originalsprache)
Background
Polyols are widely used as tablet diluents due to their high solubility, favourable taste, and ability to form robust tablets. Thus, commercially available polyols, such as mannitol and isomalt, can be considered for the preparation of low-drug-dose formulations with a high polyol load. Methods/Results: This study investigated spray-dried mannitol (Mannogem® XL Opal SD and Pearlitol® 200 SD) and fluid-bed granulated isomalt (galenIQ™ 720 and galenIQ™ 721) at magnesium stearate levels of 0.5 and 3.0 wt.% and consolidation pressures of 100 and 300 MPa. During the tableting of 100 consecutive tablets, materials displayed different ejection force profiles: galenIQ™ 720 and galenIQ™ 721 demonstrated low and stable ejection pressures; Mannogem® displayed a lubricant- and compaction pressure-dependent profile, whereas Pearlitol® produced the highest ejection forces, particularly at 0.5 wt.% magnesium stearate. To elucidate these differences, the used materials were characterised in terms of SEM imaging, moisture content, surface area and porosity analysis, particle size distribution, pXRD, and densification kinetics. Using a compaction simulator, key parameters including pressure–displacement profiles, mean yield pressure, and strain rate sensitivity of the unlubricated materials were experimentally determined, while pressure transmission, residual die-wall pressure, and friction coefficient were computed.
Conclusions
The study concluded that variations in tableting properties were primarily governed by moisture content and, for mannitol grades, by manufacturing method-dependent differences in particle microstructure. These insights provide guidance for the rational selection of polyol excipients and appropriate lubrication levels in direct compression tablet formulations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Leading Research Group, Faculty of Pharmacy, Riga Stradiņš University, LV-1007 Riga, Latvia.
- School of Pharmacy, Queen's University Belfast, Belfast BT7 1NN, UK.
- Application Laboratory, Medelpharm, 01700 Beynost, France.
ORCID-Profile: Valentyn Mohylyuk, Kirils Kukuls, Alīna Jaroslava Frolova, Zoltán Márk Horváth, Tetiana Kolisnyk, Elżbieta Maria Buczkowska, Līga Pētersone, Adrien Pelloux
Förderung
- The European Union Recovery and Resilience plan and the Latvian state budget
Zitieren
APA
Mohylyuk, V., Kukuls, K., Frolova, A. J., Horváth, Z. M., Kolisnyk, T., Buczkowska, E. M., Pētersone, L., & Pelloux, A. (2025). Difference in Tableting of Lubricated Spray-Dried Mannitol and Fluid-Bed Granulated Isomalt. Pharmaceutics, 17(12), 1566. https://doi.org/10.3390/pharmaceutics17121566
Vancouver
Mohylyuk V, Kukuls K, Frolova AJ, Horváth ZM, Kolisnyk T, Buczkowska EM, et al. Difference in Tableting of Lubricated Spray-Dried Mannitol and Fluid-Bed Granulated Isomalt. Pharmaceutics. 2025;17(12):1566. doi:10.3390/pharmaceutics17121566
BibTeX
@article{Mohylyuk2025,
author = {Mohylyuk, Valentyn and Kukuls, Kirils and Frolova, Alīna Jaroslava and Horváth, Zoltán Márk and Kolisnyk, Tetiana and Buczkowska, Elżbieta Maria and Pētersone, Līga and Pelloux, Adrien},
title = {Difference in Tableting of Lubricated Spray-Dried Mannitol and Fluid-Bed Granulated Isomalt},
journal = {Pharmaceutics},
year = {2025},
volume = {17},
number = {12},
pages = {1566},
doi = {10.3390/pharmaceutics17121566}
}
EUVIMED