EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional-Printed Osteochondral Scaffold with Biomimetic Surface Curvature for Osteochondral Regeneration

Yan Yang, Qu Lin, Zhenhai Hou, Gensheng Yang iD, Lian Shen

Pharmaceutics · 23.01.2025 · 17 (2) · 153

DOI: 10.3390/pharmaceutics17020153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pharmaceutics, online erschienen am 23.01.2025. Verfasst von Yan Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Public Welfare Technology Application Research Project of Zhejiang Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Treatment of osteochondral defects is hindered by several challenges, including the failure of traditional scaffolds with a predefined cylindrical or cuboid shape to comprehensively match the natural osteochondral tissue. Herein, we employed reverse modeling and three-dimensional (3D) printing technologies to prepare subchondral bone and cartilage.

Methods

The osteochondral scaffold was prepared by bonding the subchondral bone and cartilage layers, and the curvature distribution and biomechanical behavior were compared with those of the native tissue. Biocompatibility and osteochondral regeneration performance were further evaluated using cell adhesion and proliferation assays, as well as animal osteochondral defect repair tests.

Results

We found that increasing the printing temperature or decreasing the layer height improved the dimensional accuracy of printed subchondral bones, whereas increasing the exposure time or decreasing the layer height enhanced the dimensional accuracy of the printed cartilage. Biomimetic scaffolds exhibited curvature distribution and biomechanical behavior more similar to native tissues than traditional cylindrical scaffolds. Incorporating gelatin methacryloyl into poly (ethylene glycol) diacrylate markedly improved the biocompatibility, and correspondingly prepared osteochondral scaffolds had better osteochondral regeneration ability than the traditional scaffolds.

Conclusions

Osteochondral scaffolds exhibiting biomimetic morphology and an internal structure could be prepared based on reverse modeling and 3D printing, facilitating personalized osteochondral injury treatment.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiomimetic osteochondral scaffoldcurvature distributiondimensional accuracyosteochondral regeneration

Autor:innen und Institutionen

  • College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310014, China.
  • Department of Orthopaedics, No. 903 Hospital of PLA Joint Logistic Support Force, Hangzhou 310013, China.
  • XiangFu Laboratory, Jiaxing 314102, China.

ORCID-Profile: Gensheng Yang

Förderung

  • Public Welfare Technology Application Research Project of Zhejiang Province, China

Zitieren

APA

Yang, Y., Lin, Q., Hou, Z., Yang, G., & Shen, L. (2025). Three-Dimensional-Printed Osteochondral Scaffold with Biomimetic Surface Curvature for Osteochondral Regeneration. Pharmaceutics, 17(2), 153. https://doi.org/10.3390/pharmaceutics17020153

Vancouver

Yang Y, Lin Q, Hou Z, Yang G, Shen L. Three-Dimensional-Printed Osteochondral Scaffold with Biomimetic Surface Curvature for Osteochondral Regeneration. Pharmaceutics. 2025;17(2):153. doi:10.3390/pharmaceutics17020153

BibTeX
@article{Yang2025,
  author = {Yang, Yan and Lin, Qu and Hou, Zhenhai and Yang, Gensheng and Shen, Lian},
  title = {Three-Dimensional-Printed Osteochondral Scaffold with Biomimetic Surface Curvature for Osteochondral Regeneration},
  journal = {Pharmaceutics},
  year = {2025},
  volume = {17},
  number = {2},
  pages = {153},
  doi = {10.3390/pharmaceutics17020153}
}
Kostenlos starten →