3D Printing of Biodegradable Polymeric Microneedles for Transdermal Drug Delivery Applications
Pharmaceutics · 06.02.2024 · 16 (2) · 237
DOI: 10.3390/pharmaceutics16020237 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pharmaceutics, online erschienen am 06.02.2024. Verfasst von Faisal Khaled Aldawood und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, College of Engineering, University of Bisha, P.O. Box 001, Bisha 67714, Saudi Arabia. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Center of Excellence in Product Design and Advanced Manufacturing at North Carolina A&T State University.
Abstract (Originalsprache)
Microneedle (MN) technology is an optimal choice for the delivery of drugs via the transdermal route, with a minimally invasive procedure. MN applications are varied from drug delivery, cosmetics, tissue engineering, vaccine delivery, and disease diagnostics. The MN is a biomedical device that offers many advantages including but not limited to a painless experience, being time-effective, and real-time sensing. This research implements additive manufacturing (AM) technology to fabricate MN arrays for advanced therapeutic applications. Stereolithography (SLA) was used to fabricate six MN designs with three aspect ratios. The MN array included conical-shaped 100 needles (10 × 10 needle) in each array. The microneedles were characterized using optical and scanning electron microscopy to evaluate the dimensional accuracy. Further, mechanical and insertion tests were performed to analyze the mechanical strength and skin penetration capabilities of the polymeric MN. MNs with higher aspect ratios had higher deformation characteristics suitable for penetration to deeper levels beyond the stratum corneum. MNs with both 0.3 mm and 0.4 mm base diameters displayed consistent force–displacement behavior during a skin-equivalent penetration test. This research establishes guidelines for fabricating polymeric MN for high-accuracy and low-cost 3D printing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, College of Engineering, University of Bisha, P.O. Box 001, Bisha 67714, Saudi Arabia.
- Center of Excellence in Product Design and Advanced Manufacturing, North Carolina Agricultural and Technical State University, Greensboro, NC 27411, USA.
- Champions Oncology, Inc., 1 University Plaza Dr, Hackensack, NJ 07601, USA.
ORCID-Profile: Santosh Kumar Parupelli, Salil Desai
Förderung
- National Science Foundation
- Center of Excellence in Product Design and Advanced Manufacturing at North Carolina A&T State University
Zitieren
APA
Aldawood, F. K., Parupelli, S. K., Andar, A., & Desai, S. (2024). 3D Printing of Biodegradable Polymeric Microneedles for Transdermal Drug Delivery Applications. Pharmaceutics, 16(2), 237. https://doi.org/10.3390/pharmaceutics16020237
Vancouver
Aldawood FK, Parupelli SK, Andar A, Desai S. 3D Printing of Biodegradable Polymeric Microneedles for Transdermal Drug Delivery Applications. Pharmaceutics. 2024;16(2):237. doi:10.3390/pharmaceutics16020237
BibTeX
@article{Aldawood2024,
author = {Aldawood, Faisal Khaled and Parupelli, Santosh Kumar and Andar, Abhay and Desai, Salil},
title = {3D Printing of Biodegradable Polymeric Microneedles for Transdermal Drug Delivery Applications},
journal = {Pharmaceutics},
year = {2024},
volume = {16},
number = {2},
pages = {237},
doi = {10.3390/pharmaceutics16020237}
}
EUVIMED