EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Gastroretentive Tablets Loaded with Niclosamide Nanocrystals by the Melting Solidification Printing Process (MESO-PP)

Juan Pablo Real iD, Daniel Andrés Real iD, Lucía Lopez-Vidal iD, Bruno Andrés Barrientos, Karen Bolaños iD, Mariano Guillermo Tinti, Nicolás Javier Litterio iD, Marcelo Javier Kogan iD, Santiago Daniel Palma

Pharmaceutics · 30.04.2023 · 15 (5) · 1387

DOI: 10.3390/pharmaceutics15051387 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pharmaceutics, online erschienen am 30.04.2023. Verfasst von Juan Pablo Real und 8 weiteren Autor:innen. Beteiligte Einrichtung: Unidad de Investigación y Desarrollo en Tecnología Farmacéutica (UNITEFA), CONICET, Haya de la Torre y Medina Allemde, Córdoba X5000HUA, Argentina. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo, Universidad Nacional de Cordoba (Argentina).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Niclosamide (NICLO) is a recognized antiparasitic drug being repositioned for Helicobacter pylori. The present work aimed to formulate NICLO nanocrystals (NICLO-NCRs) to produce a higher dissolution rate of the active ingredient and to incorporate these nanosystems into a floating solid dosage form to release them into the stomach slowly. For this purpose, NICLO-NCRs were produced by wet-milling and included in a floating Gelucire l3D printed tablet by semi-solid extrusion, applying the Melting solidification printing process (MESO-PP) methodology. The results obtained in TGA, DSC, XRD and FT-IR analysis showed no physicochemical interactions or modifications in the crystallinity of NICLO-NCR after inclusion in Gelucire 50/13 ink. This method allowed the incorporation of NICLO-NCRs in a concentration of up to 25% w/w. It achieved a controlled release of NCRs in a simulated gastric medium. Moreover, the presence of NICLO-NCRs after redispersion of the printlets was observed by STEM. Additionally, no effects on the cell viability of the NCRs were demonstrated in the GES-1 cell line. Finally, gastroretention was demonstrated for 180 min in dogs. These findings show the potential of the MESO-PP technique in obtaining slow-release gastro-retentive oral solid dosage forms loaded with nanocrystals of a poorly soluble drug, an ideal system for treating gastric pathologies such as H. pylori.

Schlagwörter

Stichwörter der Autor:innen

MESO-PP 3D printinggastroretentivenanocrystalsniclosamideprintlets

Autor:innen und Institutionen

  • Unidad de Investigación y Desarrollo en Tecnología Farmacéutica (UNITEFA), CONICET, Haya de la Torre y Medina Allemde, Córdoba X5000HUA, Argentina.
  • Departamento de Ciencias Farmacéuticas, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba, Haya de la Torre y Medina Allende, Córdoba X5000XHUA, Argentina.
  • Departamento de Química Farmacológica y Toxicológica, Universidad de Chile, Santos Dumont 964, Santiago 8380494, Chile.
  • Advanced Center of Chronic Diseases (ACCDiS), Universidad de Chile, Santos Dumont 964, Santiago 8380494, Chile.
  • Center for Studies on Exercise, Metabolism and Cancer (CEMC), Laboratory of Cellular Communication, Program of Cell and Molecular Biology, Faculty of Medicine, Institute of Biomedical Sciences (ICBM), Universidad de Chi…
  • Facultad de Ciencias Agropecuarias, IRNASUS CONICET, Universidad Católica de Córdoba, Córdoba X5016DHK, Argentina.

ORCID-Profile: Juan Pablo Real, Daniel Andrés Real, Lucía Lopez-Vidal, Karen Bolaños, Nicolás Javier Litterio, Marcelo Javier Kogan

Förderung

  • Agencia Nacional de Investigación y Desarrollo
  • Universidad Nacional de Cordoba (Argentina)

Zitieren

APA

Real, J. P., Real, D. A., Lopez-Vidal, L., Barrientos, B. A., Bolaños, K., Tinti, M. G., Litterio, N. J., Kogan, M. J., & Palma, S. D. (2023). 3D-Printed Gastroretentive Tablets Loaded with Niclosamide Nanocrystals by the Melting Solidification Printing Process (MESO-PP). Pharmaceutics, 15(5), 1387. https://doi.org/10.3390/pharmaceutics15051387

Vancouver

Real JP, Real DA, Lopez-Vidal L, Barrientos BA, Bolaños K, Tinti MG, et al. 3D-Printed Gastroretentive Tablets Loaded with Niclosamide Nanocrystals by the Melting Solidification Printing Process (MESO-PP). Pharmaceutics. 2023;15(5):1387. doi:10.3390/pharmaceutics15051387

BibTeX
@article{Real2023,
  author = {Real, Juan Pablo and Real, Daniel Andrés and Lopez-Vidal, Lucía and Barrientos, Bruno Andrés and Bolaños, Karen and Tinti, Mariano Guillermo and Litterio, Nicolás Javier and Kogan, Marcelo Javier and Palma, Santiago Daniel},
  title = {3D-Printed Gastroretentive Tablets Loaded with Niclosamide Nanocrystals by the Melting Solidification Printing Process (MESO-PP)},
  journal = {Pharmaceutics},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1387},
  doi = {10.3390/pharmaceutics15051387}
}
Kostenlos starten →