A Material–Process–Equipment Integrated Design Method for Accelerating the Process Development of Twin-Screw Wet Granulation
Pharmaceuticals · 11.06.2026 · 19 (6) · 921
DOI: 10.3390/ph19060921 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pharmaceuticals, online erschienen am 11.06.2026. Verfasst von Liping Chen und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chinese Medicine Informatics, Beijing University of Chinese Medicine, Beijing 100029, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Industry and Information Technology, Ministry of Industry and Information Technology of China.
Abstract (Originalsprache)
Background
Twin-screw wet granulation (TSWG) is a promising continuous manufacturing technology, featuring high operational flexibility, short residence time and consistent quality. The process development of TSWG relies on the synergy of material characterization, screw configuration, and process parameter optimization.
Objective
In order to fully combine various design variables, and to accelerate the process development of TSWG, a material–process–equipment integrated design (MPEID) methodology is first applied to the TSWG process of Guizhi Fuling capsule, a botanical drug product.
Methods
First, an equivalent formulation was designed to save trial costs. Second, 3D printing technology was used to customize both conveying and kneading elements with the lead, with the kneading discs stagger angle (SA) and the thickness (thick) as screw element variables. The position of fabricated kneading elements was varied to generate different screw configurations. Then, the critical screw parameters (CSPs) and critical process parameters (CPPs) were identified by a two-step design of experiment (DOE) toward optimizing granule quality.
Results
As a result, the SA and thick were identified as CSPs, and the liquid-to-solid ratio was the CPP. Under the optimal TSWG process conditions, the twin-screw granulator could be operated under low torque (i.e., average torque = 1.48 ± 0.06 Nm). The dried granules exhibited superior flowability, as well as highly consistent particle size distribution with industrial batches. After capsule filling, the dissolution test results showed the prepared Guizhi Fuling capsules reached 93.7% cumulative dissolution at 15 min, which approached that of commercial capsules (i.e., 93.0%).
Conclusions
This study demonstrated the feasibility of proposed MPEID methodology, supporting the efficient and cost-effective process development of TSWG.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chinese Medicine Informatics, Beijing University of Chinese Medicine, Beijing 100029, China.
- Beijing Research Institute of Chinese Medicine, Beijing University of Chinese Medicine, Beijing 102488, China.
- Beijing Key Laboratory of Chinese Medicine Manufacturing Process Control and Quality Evaluation, School of Chinese Materia Medica, Beijing University of Chinese Medicine, Beijing 100029, China.
ORCID-Profile: Wuzhen Qi
Förderung
- Ministry of Industry and Information Technology
- Ministry of Industry and Information Technology of China
Zitieren
APA
Chen, L., Qi, W., Xie, J., Wang, Y., Zhao, S., Ma, X., Hu, Y., Jiang, H., Liu, Y., & Xu, B. (2026). A Material–Process–Equipment Integrated Design Method for Accelerating the Process Development of Twin-Screw Wet Granulation. Pharmaceuticals, 19(6), 921. https://doi.org/10.3390/ph19060921
Vancouver
Chen L, Qi W, Xie J, Wang Y, Zhao S, Ma X, et al. A Material–Process–Equipment Integrated Design Method for Accelerating the Process Development of Twin-Screw Wet Granulation. Pharmaceuticals. 2026;19(6):921. doi:10.3390/ph19060921
BibTeX
@article{Chen2026,
author = {Chen, Liping and Qi, Wuzhen and Xie, Juntao and Wang, Yidan and Zhao, Shuying and Ma, Xiao and Hu, Yifan and Jiang, Hui and Liu, Ying and Xu, Bing},
title = {A Material–Process–Equipment Integrated Design Method for Accelerating the Process Development of Twin-Screw Wet Granulation},
journal = {Pharmaceuticals},
year = {2026},
volume = {19},
number = {6},
pages = {921},
doi = {10.3390/ph19060921}
}
EUVIMED