EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transitioning Amiodarone Tablet Manufacturing: A Comparative Study of Batch and Continuous Wet Granulation

Ju-Hyun Yoon iD, Chae-Won Jeon iD, Joo-Eun Kim iD

Pharmaceuticals · 29.05.2026 · 19 (6) · 850

DOI: 10.3390/ph19060850 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pharmaceuticals, online erschienen am 29.05.2026. Verfasst von Ju-Hyun Yoon und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biopharmaceutical Chemistry, Kookmin University, Seoul 02707, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Ministry of Trade, Industry & Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: The objective of this study was to design and optimize a continuous wet granulation process for Amiodarone hydrochloride tablets using a Design of Experiments approach. The study compared and evaluated the characteristics of granules and tablets produced via a high-shear mixer (batch process) and a twin-screw granulator (continuous process).

Methods

For process optimization, a central composite design was applied to establish a design space, defining screw speed and milling size as critical process parameters (X) and dissolution rate, flowability, assay, disintegration time, and friability as dependent variables (Y).

Results

Comparative results between the two processes revealed no significant differences in in-process control parameters, and all formulations successfully met the target dissolution profiles. Notably, the similarity factor (f2) was calculated to be above 50, through which dissolution equivalence was successfully demonstrated with a high level of statistical certainty. Regarding process efficiency, lead time measurements confirmed that the continuous process dramatically reduced manufacturing time by more than 80% compared to the batch process.

Conclusions

This study validates the feasibility of converting batch-based drug manufacturing to a continuous platform without altering the formulation, presenting an effective process strategy for enhancing productivity and operational efficiency in the pharmaceutical industry.

Schlagwörter

Stichwörter der Autor:innen

amiodarone hydrochloridedesign spaceprocess optimizationtwin-screw granulation

Autor:innen und Institutionen

  • Department of Biopharmaceutical Chemistry, Kookmin University, Seoul 02707, Republic of Korea.
  • Biopharmaceutical Chemistry Major, School of Applied Chemistry, Kookmin University, Seoul 02707, Republic of Korea.
  • Department of Pharmaceutical Engineering, Kookmin University, Seoul 02707, Republic of Korea.

ORCID-Profile: Ju-Hyun Yoon, Chae-Won Jeon, Joo-Eun Kim

Förderung

  • Ministry of Trade, Industry and Energy
  • Ministry of Trade, Industry & Energy

Zitieren

APA

Yoon, J. H., Jeon, C. W., & Kim, J. E. (2026). Transitioning Amiodarone Tablet Manufacturing: A Comparative Study of Batch and Continuous Wet Granulation. Pharmaceuticals, 19(6), 850. https://doi.org/10.3390/ph19060850

Vancouver

Yoon JH, Jeon CW, Kim JE. Transitioning Amiodarone Tablet Manufacturing: A Comparative Study of Batch and Continuous Wet Granulation. Pharmaceuticals. 2026;19(6):850. doi:10.3390/ph19060850

BibTeX
@article{Yoon2026,
  author = {Yoon, Ju-Hyun and Jeon, Chae-Won and Kim, Joo-Eun},
  title = {Transitioning Amiodarone Tablet Manufacturing: A Comparative Study of Batch and Continuous Wet Granulation},
  journal = {Pharmaceuticals},
  year = {2026},
  volume = {19},
  number = {6},
  pages = {850},
  doi = {10.3390/ph19060850}
}
Kostenlos starten →