Design and Construction of a Radiochemistry Laboratory and cGMP-Compliant Radiopharmacy Facility
Pharmaceuticals · 25.05.2024 · 17 (6) · 680
DOI: 10.3390/ph17060680 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pharmaceuticals, online erschienen am 25.05.2024. Verfasst von Angela Asor und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Quantitative Health Science and Engineering, Michigan State University, East Lansing, MI 48824, USA. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Michigan State University Startup Funding, HFHS-MSU Seed Funding, MSU-Spectrum Alliance.
Abstract (Originalsprache)
The establishment of a compliant radiopharmacy facility within a university setting is crucial for supporting fundamental and preclinical studies, as well as for the production of high-quality radiopharmaceuticals for clinical testing in human protocols as part of Investigational New Drug (IND) applications that are reviewed and approved by the U.S. Food and Drug Administration (FDA). This manuscript details the design and construction of a 550 ft2 facility, which included a radiopharmacy and a radiochemistry laboratory, to support radiopharmaceutical development research and facilitate translational research projects. The facility was designed to meet FDA guidelines for the production of aseptic radiopharmaceuticals in accordance with current good manufacturing practice (cGMP). A modular hard-panel cleanroom was constructed to meet manufacturing classifications set by the International Organization of Standardization (ISO), complete with a gowning room and an anteroom. Two lead-shielded hot cells and two dual-mini hot cells, connected via underground trenches containing shielded conduits, were installed to optimize radioactive material transfer while minimizing personnel radiation exposure. Concrete blocks and lead bricks provided sufficient and cost-effective radiation shielding for the trenches. Air quality was controlled using pre-filters and high-efficiency particulate air (HEPA) filters to meet cleanroom ISO7 (Class 10,000) standards. A laminar-flow biosafety cabinet was installed in the cleanroom for preparation of sterile dose vials. Noteworthy was a laminar-flow insert in the hot cell that provided a shielded laminar-flow sterile environment meeting ISO5 (class 100) standards. The design included the constant control and monitoring of differential air pressures across the cleanroom, anteroom, gowning room, and controlled research space, as well as maintenance of temperature and humidity. The facility was equipped with state-of-the-art equipment for quality control and release testing of radiopharmaceuticals. Administrative controls and standard operating procedures (SOPs) were established to ensure compliance with manufacturing standards and regulatory requirements. Overall, the design and construction of this radiopharmacy facility exemplified a commitment to advancing fundamental, translational, and clinical applications of radiopharmaceutical research within an academic environment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Quantitative Health Science and Engineering, Michigan State University, East Lansing, MI 48824, USA.
- Department of Chemistry, Michigan State University, East Lansing, MI 48824, USA.
- Comparative Medicine and Integrative Biology, Michigan State University, East Lansing, MI 48824, USA.
- Radiological Science Department, Taif University, Taif 21944, Saudi Arabia.
- Department of Radiology, Michigan State University, East Lansing, MI 48824, USA.
- WorkingBuildings, Atlanta, GA 30309, USA.
ORCID-Profile: Angela Asor, Jinda Fan
Förderung
- Michigan State University Startup Funding
- HFHS-MSU Seed Funding
- MSU-Spectrum Alliance
- NIH
Zitieren
APA
Asor, A., Metebi, A., Smith, K., Last, K., Strauss, E., & Fan, J. (2024). Design and Construction of a Radiochemistry Laboratory and cGMP-Compliant Radiopharmacy Facility. Pharmaceuticals, 17(6), 680. https://doi.org/10.3390/ph17060680
Vancouver
Asor A, Metebi A, Smith K, Last K, Strauss E, Fan J. Design and Construction of a Radiochemistry Laboratory and cGMP-Compliant Radiopharmacy Facility. Pharmaceuticals. 2024;17(6):680. doi:10.3390/ph17060680
BibTeX
@article{Asor2024,
author = {Asor, Angela and Metebi, Abdullah and Smith, Kylie and Last, Kurt and Strauss, Elaine and Fan, Jinda},
title = {Design and Construction of a Radiochemistry Laboratory and cGMP-Compliant Radiopharmacy Facility},
journal = {Pharmaceuticals},
year = {2024},
volume = {17},
number = {6},
pages = {680},
doi = {10.3390/ph17060680}
}
EUVIMED