EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Use of Micro-Ribbons and Micro-Fibres in the Formulation of 3D Printed Fast Dissolving Oral Films

Marwan Algellay iD, Matthew Roberts, Lucy Bosworth iD, Satyajit D Sarker iD, Amos A Fatokun iD, Touraj Ehtezazi iD

Pharmaceuticals · 05.01.2023 · 16 (1) · 79

DOI: 10.3390/ph16010079 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Pharmaceuticals, online erschienen am 05.01.2023. Verfasst von Marwan Algellay und 5 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF…. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Libyan Government, Cultural Affairs Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing (3DP) allows production of novel fast dissolving oral films (FDFs). However, mechanical properties of the films may not be desirable when certain excipients are used. This work investigated whether adding chitosan micro-ribbons or cellulose microfibres will achieve desired FDFs by fused deposition modelling 3DP. Filaments containing polyvinyl alcohol (PVA) and paracetamol as model drug were manufactured at 170 °C. At 130 °C, filaments containing polyvinylpyrrolidone (PVP) and paracetamol were also created. FDFs were printed with plain or mesh patterns at temperatures of 200 °C (PVA) or 180 °C (PVP). Both chitosan micro-ribbons and cellulose micro-fibres improved filament mechanical properties at 1% w/w concentration in terms of flexibility and stiffness. The filaments were not suitable for printing at higher concentrations of chitosan micro-ribbons and cellulose micro-fibres. Furthermore, mesh FDFs containing only 1% chitosan micro-ribbons disintegrated in distilled water within 40.33 ± 4.64 s, while mesh FDFs containing only 7% croscarmellose disintegrated in 55.33 ± 2.86 s, and croscarmellose containing films showed signs of excipient scorching for PVA polymer. Cellulose micro-fibres delayed disintegration of PVA mesh films to 108.66 ± 3.68 s at 1% w/w. In conclusion, only chitosan micro-ribbons created a network of hydrophilic channels within the films, which allowed faster disintegration time at considerably lower concentrations.

Schlagwörter

Stichwörter der Autor:innen

cellulosechitosanfast dissolving oral filmsfused deposition modellingthree-dimensional printing

Autor:innen und Institutionen

  • Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF, UK.
  • Department of Eye and Vision Science, Institute of Life Course and Medical Sciences, University of Liverpool, 6 West Derby Street, Liverpool L7 8TX, UK.

ORCID-Profile: Marwan Algellay, Lucy Bosworth, Satyajit D Sarker, Amos A Fatokun, Touraj Ehtezazi

Förderung

  • Libyan Government, Cultural Affairs Department

Zitieren

APA

Algellay, M., Roberts, M., Bosworth, L., Sarker, S. D., Fatokun, A. A., & Ehtezazi, T. (2023). The Use of Micro-Ribbons and Micro-Fibres in the Formulation of 3D Printed Fast Dissolving Oral Films. Pharmaceuticals, 16(1), 79. https://doi.org/10.3390/ph16010079

Vancouver

Algellay M, Roberts M, Bosworth L, Sarker SD, Fatokun AA, Ehtezazi T. The Use of Micro-Ribbons and Micro-Fibres in the Formulation of 3D Printed Fast Dissolving Oral Films. Pharmaceuticals. 2023;16(1):79. doi:10.3390/ph16010079

BibTeX
@article{Algellay2023,
  author = {Algellay, Marwan and Roberts, Matthew and Bosworth, Lucy and Sarker, Satyajit D and Fatokun, Amos A and Ehtezazi, Touraj},
  title = {The Use of Micro-Ribbons and Micro-Fibres in the Formulation of 3D Printed Fast Dissolving Oral Films},
  journal = {Pharmaceuticals},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {79},
  doi = {10.3390/ph16010079}
}
Kostenlos starten →