EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Low-Cost CNC-Milled PMMA Microfluidic Chips as a Prototype for Organ-on-a-Chip and Neurospheroid Applications

Sushmita Mishra, Ginia Mondal, Murali Kumarasamy

Organoids · 11.06.2025 · 4 (2) · 13

DOI: 10.3390/organoids4020013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Organoids, online erschienen am 11.06.2025. Verfasst von Sushmita Mishra und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Pharmaceuticals (DoP), Ministry of Chemicals and Fertilizers (MoCF), Government of India (GoI), Center of Excellence (CoE) in Biological Therapeutics, NIPER Hajipur, Promotion of Research and Innovation in Pharma (PRIP) MedTech Sector.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improved in vitro models are needed to reduce costs and delays in central nervous system (CNS) drug discovery. The FDA Modernization Acts 2.0 and 3.0 require human-centered alternative testing methods to mitigate animal-based experiments and discovery delays, and to ensure human safety. Developing cost-efficient, flexible microfluidic chips is essential to advance organ-on-chip (OoC) technology for drug discovery and disease modeling. While CNC micromilling shows promise for fabricating microfluidic devices, it remains underutilized due to limited accessibility. We present a simple CNC-milled flexible microfluidic chip fabricated from thermoplastic poly (methyl methacrylate) (PMMA). The structure of the microplate included drilled openings for connecting the wells. The chip’s biocompatibility was evaluated with isolated primary neuronal cultures from postnatal Wistar rat pups (p1). Primary cells cultured in the device showed high viability, differentiation, and 3D neurosphere formation, similar to conventional well-plate cultures. Neuronal cultures showed neurite growth and functional markers. Although cleanroom-based methods provide higher accuracy, the chip effectively promotes cell viability, differentiation, and alignment, offering an ideal platform for tissue modeling and OoC applications. It allows cell biologists to quickly create prototypes at lower cost and in less time than required for soft lithography and is a viable alternative to the current manufacturing methods.

Förderung

  • Department of Pharmaceuticals (DoP), Ministry of Chemicals and Fertilizers (MoCF), Government of India (GoI)
  • Center of Excellence (CoE) in Biological Therapeutics, NIPER Hajipur
  • Promotion of Research and Innovation in Pharma (PRIP) MedTech Sector

Zitieren

APA

Mishra, S., Mondal, G., & Kumarasamy, M. (2025). Development of Low-Cost CNC-Milled PMMA Microfluidic Chips as a Prototype for Organ-on-a-Chip and Neurospheroid Applications. Organoids, 4(2), 13. https://doi.org/10.3390/organoids4020013

Vancouver

Mishra S, Mondal G, Kumarasamy M. Development of Low-Cost CNC-Milled PMMA Microfluidic Chips as a Prototype for Organ-on-a-Chip and Neurospheroid Applications. Organoids. 2025;4(2):13. doi:10.3390/organoids4020013

BibTeX
@article{Mishra2025,
  author = {Mishra, Sushmita and Mondal, Ginia and Kumarasamy, Murali},
  title = {Development of Low-Cost CNC-Milled PMMA Microfluidic Chips as a Prototype for Organ-on-a-Chip and Neurospheroid Applications},
  journal = {Organoids},
  year = {2025},
  volume = {4},
  number = {2},
  pages = {13},
  doi = {10.3390/organoids4020013}
}
Kostenlos starten →