EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Cold Rolling and Annealing Behavior of Extra-Low-Carbon Steel by Magnetic NDE Parameters

Siuli Dutta, Ashis K. Panda, Rajat K. Roy

NDT · 11.06.2025 · 3 (2) · 14

DOI: 10.3390/ndt3020014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift NDT, online erschienen am 11.06.2025. Verfasst von Siuli Dutta und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Council of Scientific and Industrial Research, New Delhi, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study intends to understand the effect of annealing behavior on the microstructure and mechanical and magnetic properties of cold-rolled extra-low-carbon steel. Deformed steel samples are annealed at temperature ranges of 200–690 °C followed by air-cooling. As part of this study, Magnetic Hysteresis loop (MHL) and Barkhausen emission (MBE) measurements are carried out for non-destructive evaluation (NDE) of the mechanical properties that are altered during annealing, viz. recovery and recrystallization. At low annealing temperature ranges 200 < T < 550 °C, the recovery causes no substantial variations in microstructure, hardness value from 191–185 HV, and tensile strength 456–452 MPa, while magnetic coercivity decreases from 293–275 A/m for cold-rolled annealed steels. The microstructural changes due to recovery and recrystallization are examined using transmission electron microscopy and orientation imaging microscopy (OIM) through electron backscattered diffraction (EBSD). Recrystallization is found after annealing at T > 550 °C, confirmed by the lowering of the microstructural KAM value from 0.81° to 0.65° and a hardness drop from 190.02 to 98 HV for cold-rolled extra-low-carbon steel.

Förderung

  • Council of Scientific and Industrial Research, New Delhi, India

Zitieren

APA

Dutta, S., Panda, A. K., & Roy, R. K. (2025). Evaluation of Cold Rolling and Annealing Behavior of Extra-Low-Carbon Steel by Magnetic NDE Parameters. NDT, 3(2), 14. https://doi.org/10.3390/ndt3020014

Vancouver

Dutta S, Panda AK, Roy RK. Evaluation of Cold Rolling and Annealing Behavior of Extra-Low-Carbon Steel by Magnetic NDE Parameters. NDT. 2025;3(2):14. doi:10.3390/ndt3020014

BibTeX
@article{Dutta2025,
  author = {Dutta, Siuli and Panda, Ashis K. and Roy, Rajat K.},
  title = {Evaluation of Cold Rolling and Annealing Behavior of Extra-Low-Carbon Steel by Magnetic NDE Parameters},
  journal = {NDT},
  year = {2025},
  volume = {3},
  number = {2},
  pages = {14},
  doi = {10.3390/ndt3020014}
}
Kostenlos starten →