EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Identifying Ultrasonic Testing Based Nondestructive Qualification Parameters for Laser DED Processed IN718

Guillermo Huanes-Alvan, Himanshu Sahasrabudhe, Sunil Kishore Chakrapani

NDT · 05.06.2025 · 3 (2) · 12

DOI: 10.3390/ndt3020012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift NDT, online erschienen am 05.06.2025. Verfasst von Guillermo Huanes-Alvan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article explores the use of ultrasonic nondestructive evaluation for qualification of laser-DED IN718 samples. The main goal of this article is to identify potential ultrasonic parameters which have highest sensitivity to microstructral changes that result from fabrication of DED samples. The ultrasonic qualification parameters were extracted from ultrasonic testing including velocity and attenuation measurement, and C-Scan imaging. These measurements were further used to extract parameters that quantify the anisotropy, microstructural heterogeneity, and grain scattering. Two laser-DED IN718 samples fabricated with slightly different processing parameters were evaluated to observe the influence of the laser power and scan speed on the qualification parameters. The identified qualification parameters were compared for these two samples, along with a hot-rolled sample that was also used as reference. The results suggest that the anisotropy, attenuation, and heterogeneity were highest in the DED samples compared to the reference sample. The identified qualification parameters seem to capture these changes, suggesting they could be potentially used for qualification of AM parts.

Zitieren

APA

Huanes-Alvan, G., Sahasrabudhe, H., & Chakrapani, S. K. (2025). Identifying Ultrasonic Testing Based Nondestructive Qualification Parameters for Laser DED Processed IN718. NDT, 3(2), 12. https://doi.org/10.3390/ndt3020012

Vancouver

Huanes-Alvan G, Sahasrabudhe H, Chakrapani SK. Identifying Ultrasonic Testing Based Nondestructive Qualification Parameters for Laser DED Processed IN718. NDT. 2025;3(2):12. doi:10.3390/ndt3020012

BibTeX
@article{HuanesAlvan2025,
  author = {Huanes-Alvan, Guillermo and Sahasrabudhe, Himanshu and Chakrapani, Sunil Kishore},
  title = {Identifying Ultrasonic Testing Based Nondestructive Qualification Parameters for Laser DED Processed IN718},
  journal = {NDT},
  year = {2025},
  volume = {3},
  number = {2},
  pages = {12},
  doi = {10.3390/ndt3020012}
}
Kostenlos starten →