EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Defect Localization in Metal Plates Using Vibroacoustic Modulation

Mohammad M. Bazrafkan, Marcus Rutner

NDT · 2023

DOI: 10.3390/ndt1010002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift NDT, 2023. Verfasst von Mohammad M. Bazrafkan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (DFG), Hamburg University of Technology (TUHH).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper reviews the state-of-the-art approaches in defect localization and specifies the remaining questions and challenges. Furthermore, this study presents a novel defect localization methodology using the nonlinear interaction of primary Lamb wave modes and vibroacoustic modulation (VAM), combined with damage imaging, to address the current shortcomings of defect localization. The study investigates this methodology experimentally with respect to defect interpretation, resolution, and applicability. Two Lamb waves with high and low frequencies, one being continuous and the other a tone burst, were excited using two different piezoelectric sensors. The amplitude of the measured signal at the first sideband frequency was evaluated with a short-time Fourier transform (STFT) and used for damage imaging via the delay and sum method. This study also includes a discussion on identifying the source of nonlinearity reflected in the first sideband. The experimental measurements prove that the localization of defect nonlinearity is possible with high accuracy, without the need for a baseline measurement, and with a minimum number of sensors. Sensitivity measurements with respect to the required length of the high-frequency tone burst and the sensor arrangement were also conducted.

Förderung

  • German Research Foundation (DFG)
  • Hamburg University of Technology (TUHH)

Zitieren

APA

Bazrafkan, M. M., & Rutner, M. (2023). Defect Localization in Metal Plates Using Vibroacoustic Modulation. NDT. https://doi.org/10.3390/ndt1010002

Vancouver

Bazrafkan MM, Rutner M. Defect Localization in Metal Plates Using Vibroacoustic Modulation. NDT. 2023. doi:10.3390/ndt1010002

BibTeX
@article{Bazrafkan2023,
  author = {Bazrafkan, Mohammad M. and Rutner, Marcus},
  title = {Defect Localization in Metal Plates Using Vibroacoustic Modulation},
  journal = {NDT},
  year = {2023},
  doi = {10.3390/ndt1010002}
}
Kostenlos starten →