Bio-Inspired Hierarchical Carbon Structures Coated with Zeolite for High-Yield Carbon Nanotube Synthesis
Nanomanufacturing · 02.11.2026 · 6 (4) · 31
DOI: 10.3390/nanomanufacturing6040031 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomanufacturing, online erschienen am 02.11.2026. Verfasst von Kamrun Nahar Fatema und 6 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Efficient synthesis of carbon nanotubes (CNTs) remains challenging due to catalyst nanoparticle agglomeration during catalytic chemical vapor deposition (CCVD). In this study, biomorphic carbon materials (BCMs) derived from natural wood were coated with LTA zeolite and used as structured supports for cobalt-catalyzed CNT synthesis. The carbonized BCMs preserved their hierarchical cellular architecture, while the LTA zeolite coating provided a microporous interfacial layer for cobalt catalyst loading. CNTs were synthesized by CCVD using acetylene at 650 °C. CNT growth was successfully achieved on the LTA-zeolite-coated biomorphic supports, with TGA-derived carbon deposition values ranging from 2.21% to 21.82%. Red pine and red cedar exhibited comparatively low carbon deposition values of 2.40% and 2.21%, respectively, whereas cypress and Gorman spruce showed substantially higher values of 21.82% and 21.01%, respectively. The highest carbon deposition value was obtained for the cypress-derived BCM. Transmission electron microscopy confirmed the formation of well-developed multiwalled carbon nanotubes with support-dependent diameters and highly graphitized walls. The results demonstrate successful CNT growth on LTA-zeolite-coated biomorphic carbon supports and reveal pronounced support-dependent differences associated with the biomorphic pore architecture and gas-transport characteristics.
Zitieren
APA
Fatema, K. N., Biswas, M. R. U. D., Kim, S. Y., Han, I. S., Kim, Y. S., Lee, S. C., & Kim, I. J. (2026). Bio-Inspired Hierarchical Carbon Structures Coated with Zeolite for High-Yield Carbon Nanotube Synthesis. Nanomanufacturing, 6(4), 31. https://doi.org/10.3390/nanomanufacturing6040031
Vancouver
Fatema KN, Biswas MRUD, Kim SY, Han IS, Kim YS, Lee SC, et al. Bio-Inspired Hierarchical Carbon Structures Coated with Zeolite for High-Yield Carbon Nanotube Synthesis. Nanomanufacturing. 2026;6(4):31. doi:10.3390/nanomanufacturing6040031
BibTeX
@article{Fatema2026,
author = {Fatema, Kamrun Nahar and Biswas, Md Rokon Ud Dowla and Kim, Se Young and Han, In Sub and Kim, Young Suk and Lee, Sung Chil and Kim, Ik Jin},
title = {Bio-Inspired Hierarchical Carbon Structures Coated with Zeolite for High-Yield Carbon Nanotube Synthesis},
journal = {Nanomanufacturing},
year = {2026},
volume = {6},
number = {4},
pages = {31},
doi = {10.3390/nanomanufacturing6040031}
}
EUVIMED