EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Tribological Assessment of Carbon Nanostructure Coatings Directly Grown on AISI 1018 Low Carbon Steel Substrates

Alexis Pérez Gasquez y Marín, Reynier Suárez-Martínez, Javier Lara-Romero, Ricardo Rangel Segura, José Lemus-Ruiz, Omar Jiménez-Alemán, Fernando Chiñas-Castillo

Nanomanufacturing · 01.08.2026 · 6 (3) · 20

DOI: 10.3390/nanomanufacturing6030020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomanufacturing, online erschienen am 01.08.2026. Verfasst von Alexis Pérez Gasquez y Marín und 6 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Sciences, Humanities, Technology and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores the direct synthesis of carbon nanostructures on AISI 1018 low-carbon steel via spray pyrolysis, using α-pinene—a turpentine-derived terpene—as a sustainable carbon source. Two synthesis routes were evaluated: a catalyst-aided approach using ferrocene and a catalyst-free approach. Both methods yielded homogeneous coatings; however, the addition of ferrocene produced carbon nanotube (CNT) films (~70 μm), while the catalyst-free method resulted in carbon nanofiber (CNF) films (~50 μm). Tribological testing revealed that CNF coatings maintained a consistently low friction coefficient of ~0.12. In contrast, CNT coatings exhibited higher friction, increasing from 0.15 to 0.35 under loads of 2–5 N. SEM and Raman spectroscopy of the wear tracks suggest that CNFs retain their crystalline structure during friction, whereas CNTs become increasingly defective, leading to higher friction levels.

Förderung

  • Ministry of Sciences, Humanities, Technology and Innovation

Zitieren

APA

Marín, A. P. G. Y., Suárez-Martínez, R., Lara-Romero, J., Segura, R. R., Lemus-Ruiz, J., Jiménez-Alemán, O., & Chiñas-Castillo, F. (2026). Synthesis and Tribological Assessment of Carbon Nanostructure Coatings Directly Grown on AISI 1018 Low Carbon Steel Substrates. Nanomanufacturing, 6(3), 20. https://doi.org/10.3390/nanomanufacturing6030020

Vancouver

Marín APGY, Suárez-Martínez R, Lara-Romero J, Segura RR, Lemus-Ruiz J, Jiménez-Alemán O, et al. Synthesis and Tribological Assessment of Carbon Nanostructure Coatings Directly Grown on AISI 1018 Low Carbon Steel Substrates. Nanomanufacturing. 2026;6(3):20. doi:10.3390/nanomanufacturing6030020

BibTeX
@article{Marn2026,
  author = {Marín, Alexis Pérez Gasquez y and Suárez-Martínez, Reynier and Lara-Romero, Javier and Segura, Ricardo Rangel and Lemus-Ruiz, José and Jiménez-Alemán, Omar and Chiñas-Castillo, Fernando},
  title = {Synthesis and Tribological Assessment of Carbon Nanostructure Coatings Directly Grown on AISI 1018 Low Carbon Steel Substrates},
  journal = {Nanomanufacturing},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {20},
  doi = {10.3390/nanomanufacturing6030020}
}
Kostenlos starten →