Facile Synthesis and Characterization of Molybdenum Carbides/Carbon Nanocomposites by Laser Pyrolysis
Nanomanufacturing · 2022
DOI: 10.3390/nanomanufacturing2030009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomanufacturing, 2022. Verfasst von Théo Caroff und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CNRS, CEA.
Abstract (Originalsprache)
This short communication reports on the facile and scalable synthesis and characterization of molybdenum carbides/carbon nanocomposites prepared by laser pyrolysis in a one-step process. Water and commercial molybdenum oxide were used as low-cost environmentally friendly precursors. The nanocomposites are mainly composed of two types of carbides with different apparent crystallite sizes, 21 ± 1 nm and 9 ± 1 nm for Mo2C and MoC1−x, respectively. Thanks to a simple annealing at 500 °C under argon, it was possible to increase the specific surface area around 50 m2/g without changing the morphology of the nanocomposite.
Förderung
- CNRS
- CEA
Zitieren
APA
Caroff, T., Badaki, P., Herbert, N., Tessier, F., Berthebaud, D., Ohashi, N., Uchikoshi, T., Lonchambon, P., Herlin-Boime, N., & Grasset, F. (2022). Facile Synthesis and Characterization of Molybdenum Carbides/Carbon Nanocomposites by Laser Pyrolysis. Nanomanufacturing. https://doi.org/10.3390/nanomanufacturing2030009
Vancouver
Caroff T, Badaki P, Herbert N, Tessier F, Berthebaud D, Ohashi N, et al. Facile Synthesis and Characterization of Molybdenum Carbides/Carbon Nanocomposites by Laser Pyrolysis. Nanomanufacturing. 2022. doi:10.3390/nanomanufacturing2030009
BibTeX
@article{Caroff2022,
author = {Caroff, Théo and Badaki, Pitalinani and Herbert, Nathalie and Tessier, Franck and Berthebaud, David and Ohashi, Naoki and Uchikoshi, Tetsuo and Lonchambon, Pierre and Herlin-Boime, Nathalie and Grasset, Fabien},
title = {Facile Synthesis and Characterization of Molybdenum Carbides/Carbon Nanocomposites by Laser Pyrolysis},
journal = {Nanomanufacturing},
year = {2022},
doi = {10.3390/nanomanufacturing2030009}
}
EUVIMED