EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Manufacturing Large-Area Perovskite Photovoltaics by Blade Coating Porous PbI2–N-Methyl-2-Pyrrolidone Intermediates

Seung Ju Choi, Minseop Byun, Minjin Kim, Seog-Young Yoon, Yimhyun Jo

Nanomaterials · 16.11.2026 · 16 (22) · 1481

DOI: 10.3390/nano16221481 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 16.11.2026. Verfasst von Seung Ju Choi und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Manufacturing perovskite photovoltaics over large areas requires a coating and conversion sequence that remains effective as the substrate width increases. Here, a blade-coated lead iodide intermediate containing N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO) was thermally restructured into a porous PbI2–NMP scaffold before immersion in a formamidinium iodide/methylammonium chloride solution. The blade gap and substrate translation speed were fixed at 150 μm and 20 cm min−1, respectively, while the post-coating heating time at 60 °C was varied from 0 to 10 min. X-ray diffraction of reference solvent-complex films suggests that mild heating preferentially removes the DMSO-associated fraction while the NMP-coordinated intermediate is retained, thereby opening infiltration pathways through the precursor layer. A 5 min treatment produced the most favorable balance between scaffold opening and suppression of crystalline PbI2, yielding larger perovskite grains and a time-resolved photoluminescence lifetime of 1224 ns, 2.8 times that of the unheated reference. Devices manufactured with this process achieved champion power conversion efficiencies of 25.40%, 23.25%, 22.08%, and 21.09% at device areas of 0.0803, 1, 25, and 64 cm2, respectively. These results identify intermediate-layer restructuring as a practical process-control step for transferring blade-coated perovskite fabrication from laboratory cells to larger photovoltaic modules.

Förderung

  • Korea Institute of Energy Research

Zitieren

APA

Choi, S. J., Byun, M., Kim, M., Yoon, S., & Jo, Y. (2026). Manufacturing Large-Area Perovskite Photovoltaics by Blade Coating Porous PbI2–N-Methyl-2-Pyrrolidone Intermediates. Nanomaterials, 16(22), 1481. https://doi.org/10.3390/nano16221481

Vancouver

Choi SJ, Byun M, Kim M, Yoon S, Jo Y. Manufacturing Large-Area Perovskite Photovoltaics by Blade Coating Porous PbI2–N-Methyl-2-Pyrrolidone Intermediates. Nanomaterials. 2026;16(22):1481. doi:10.3390/nano16221481

BibTeX
@article{Choi2026,
  author = {Choi, Seung Ju and Byun, Minseop and Kim, Minjin and Yoon, Seog-Young and Jo, Yimhyun},
  title = {Manufacturing Large-Area Perovskite Photovoltaics by Blade Coating Porous PbI2–N-Methyl-2-Pyrrolidone Intermediates},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {1481},
  doi = {10.3390/nano16221481}
}
Kostenlos starten →