EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

When Does Nanosizing Matter for Radiation Shielding? A Physical Bound, a Test of Reported Nano Advantages and Grain-Size Rules for Glass Gamma–Neutron Shields

Yetkin Senemoğlu

Nanomaterials · 16.11.2026 · 16 (22) · 1479

DOI: 10.3390/nano16221479 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 16.11.2026. Verfasst von Yetkin Senemoğlu. Die Arbeit nennt 109 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nano-sized fillers are widely reported to attenuate gamma rays better than micro-sized fillers of the same composition, yet it is unclear when particle size can matter at all. At fixed composition and density, Jensen’s inequality makes the homogeneous mixture an upper bound on narrow-beam attenuation, so nanosizing can only remove a heterogeneity penalty. We show that this penalty collapses onto a master curve in the optical size τ=Δμd and derive a packing correction from the Percus–Yevick structure factor that agrees with equilibrated Monte Carlo packings within about 4%. Without fitting, explicit packings reproduce a 37 vol% B4C self-shielding benchmark to within 1.2–3.4% for four cross-section sets, although no measurement uncertainties are available for it. For polydisperse powders the volume-weighted diameter D[4,3] is the appropriate size measure, whereas the number mean can misstate the loss by up to 76% for geometric standard deviations up to 2. In broad-beam geometry the grain effect shrinks by 15–63%, depending on slab thickness and energy, above absorption edges mainly through K fluorescence. We then compiled 65 published nano/micro studies and tested those with paired data against bounds computed for their own compositions. Above 500 keV, where no physical mechanism permits an excess, the nano samples of all 26 studies with paired data exceed the bound by a median of 9.6%, and those of the 22 studies that pass a set-up check by 8.9%, whereas matched micro samples agree with it. This excess cannot arise from grain physics or from an error in filler fraction. Its energy independence is consistent with, but does not prove, a multiplicative measurement error that affects the nano samples. All but one of the studies that show it in a testable form belong to one network of co-authoring groups, and the single independent study shows a smaller excess of about 5%. For glass-matrix gamma–neutron shields at the loadings and loss criteria considered, only the thermal-neutron absorber requires fine grains, about 0.5 µm for Gd2O3 and 5–10 µm for B4C, whereas the gamma filler can remain micrometer-sized. These results show when nanosizing is worth its cost and motivate a minimal reporting standard for attenuation studies.

Zitieren

APA

Senemoğlu, Y. (2026). When Does Nanosizing Matter for Radiation Shielding? A Physical Bound, a Test of Reported Nano Advantages and Grain-Size Rules for Glass Gamma–Neutron Shields. Nanomaterials, 16(22), 1479. https://doi.org/10.3390/nano16221479

Vancouver

Senemoğlu Y. When Does Nanosizing Matter for Radiation Shielding? A Physical Bound, a Test of Reported Nano Advantages and Grain-Size Rules for Glass Gamma–Neutron Shields. Nanomaterials. 2026;16(22):1479. doi:10.3390/nano16221479

BibTeX
@article{Senemolu2026,
  author = {Senemoğlu, Yetkin},
  title = {When Does Nanosizing Matter for Radiation Shielding? A Physical Bound, a Test of Reported Nano Advantages and Grain-Size Rules for Glass Gamma–Neutron Shields},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {1479},
  doi = {10.3390/nano16221479}
}
Kostenlos starten →