EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Phenylethylammonium Bromide Post-Treatment for 2D/3D Heterostructure Formation in High-Performance Perovskite Solar Cells

Hui Liu, Guoquan Wu, Junqing Mo, Ruiheng Zhang

Nanomaterials · 08.11.2026 · 16 (21) · 1445

DOI: 10.3390/nano16211445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 08.11.2026. Verfasst von Hui Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Physics and Opto-Electronic Engineering, Guangdong Provincial Key Laboratory of Sensing Physics and System Integration Applications, Guangd…. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inverted perovskite solar cells (IPSCs) have gained a lot of attention and a significant amount of research interest in recent years due to their outstanding optoelectronic properties and rapid enhancement of efficiency. However, the IPSCs are still significantly limited by the influence of abundant defects and detrimental nonradiative recombination, especially at the top interface of the perovskite film. Herein, a surface 2D capping layer is constructed to form a 2D/3D heterostructure by systematically regulating the concentration of the PEABr post-treatment solution. An optimal PEABr concentration of 1 mg/mL is identified for the formation of the desired surface 2D capping layer. The perovskite film treated with optimal PEABr exhibits the most pronounced improvements in film morphology, crystallinity enhancement, defect reduction, and suppression of nonradiative recombination. Consequently, the best-performing IPSCs achieve a champion efficiency of 24.58%, together with an open-circuit voltage of 1.15 V, a short-circuit current density of 25.68 mA/cm2, and a fill factor of 82.80%. This work demonstrates that regulating the PEABr concentration is an effective strategy for constructing surface 2D/3D heterostructures and achieving effective interfacial passivation, offering a promising route for advancing interface engineering and enhancing the performance enhancement of IPSCs.

Schlagwörter

Stichwörter der Autor:innen

2D/3D heterostructurePEABr post-treatmentinterface engineeringinverted perovskite solar cells

Autor:innen und Institutionen

  • School of Physics and Opto-Electronic Engineering, Guangdong Provincial Key Laboratory of Sensing Physics and System Integration Applications, Guangdong University of Technology, Guangzhou 510006, China.

Förderung

  • Guangdong University of Technology

Zitieren

APA

Liu, H., Wu, G., Mo, J., & Zhang, R. (2026). Optimization of Phenylethylammonium Bromide Post-Treatment for 2D/3D Heterostructure Formation in High-Performance Perovskite Solar Cells. Nanomaterials, 16(21), 1445. https://doi.org/10.3390/nano16211445

Vancouver

Liu H, Wu G, Mo J, Zhang R. Optimization of Phenylethylammonium Bromide Post-Treatment for 2D/3D Heterostructure Formation in High-Performance Perovskite Solar Cells. Nanomaterials. 2026;16(21):1445. doi:10.3390/nano16211445

BibTeX
@article{Liu2026,
  author = {Liu, Hui and Wu, Guoquan and Mo, Junqing and Zhang, Ruiheng},
  title = {Optimization of Phenylethylammonium Bromide Post-Treatment for 2D/3D Heterostructure Formation in High-Performance Perovskite Solar Cells},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {1445},
  doi = {10.3390/nano16211445}
}
Kostenlos starten →