EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation, Emulsion Stability and Preliminary Demoulding Evaluation of a Wax-Free Water-Based Soybean Oil-Mineral Oil Concrete Release Agent

Biliang Zhang, Jiejun Yuan, Haidong Zhang, Wei Xu, Yongmei Wang, Leiying Han, Xiaoyan Liu iD

Nanomaterials · 05.11.2026 · 16 (21) · 1429

DOI: 10.3390/nano16211429 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 05.11.2026. Verfasst von Biliang Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Power Transmission and Transformation Co., Ltd., Nanjing 210000, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Power Transmission and Transformation Co., Ltd., National Natural Science Foundation of China, Jiangsu Science and Technology Department of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water-based, wax-free release agents are attractive for concrete formwork, yet their emulsification window and demoulding behaviour remain poorly defined. This work prepared a soybean-oil/naphthenic-oil emulsion and evaluated its stability and pull-off performance. OP-10/Span-80 blends produced a visually stable soybean-oil emulsion in a narrow hydrophilic–lipophilic balance (HLB) window, with only trace or small separation within 1 h across a calculated HLB interval of 12.15–12.31 at an assumed OP-10 HLB of 14.5 (11.3–12.3 across the reported range). The high-non-volatile-content naphthenic-oil emulsion containing 1.00 wt% sodium benzoate (MH2+) showed no visible phase boundary after centrifugation at 7000 rpm for 6 min and only a thin re-emulsifiable surface layer after 20 d, whereas the sodium-benzoate-free emulsion separated into three phases. At 1.57–1.59 micrometres, the 1:3 blend of the soybean-oil emulsion and MH2+ gave a pull-off force of 7.92 N, comparable to EP6 (7.963 N at 1.50 micrometres) and lower than MH2+ (11.63 N) and the soybean-oil emulsion (55.26 N), and produced visually more uniform demoulded surfaces. The blend force increased to 73.68 N at 1.05 micrometres, indicating that sufficient coating is essential. The 1:3 blend is therefore a promising low-force, wax-free water-based release agent at sufficient coating, providing a basis for coating optimization and field validation.

Schlagwörter

Stichwörter der Autor:innen

concrete release agentdemoulding forceemulsionsodium benzoatesoybean oil

Autor:innen und Institutionen

  • Jiangsu Power Transmission and Transformation Co., Ltd., Nanjing 210000, China.
  • College of Civil Engineering and Transportation, Hohai University, Nanjing 210098, China.

ORCID-Profile: Xiaoyan Liu

Förderung

  • Jiangsu Power Transmission and Transformation Co., Ltd.
  • National Natural Science Foundation of China
  • Jiangsu Science and Technology Department of China

Zitieren

APA

Zhang, B., Yuan, J., Zhang, H., Xu, W., Wang, Y., Han, L., & Liu, X. (2026). Preparation, Emulsion Stability and Preliminary Demoulding Evaluation of a Wax-Free Water-Based Soybean Oil-Mineral Oil Concrete Release Agent. Nanomaterials, 16(21), 1429. https://doi.org/10.3390/nano16211429

Vancouver

Zhang B, Yuan J, Zhang H, Xu W, Wang Y, Han L, et al. Preparation, Emulsion Stability and Preliminary Demoulding Evaluation of a Wax-Free Water-Based Soybean Oil-Mineral Oil Concrete Release Agent. Nanomaterials. 2026;16(21):1429. doi:10.3390/nano16211429

BibTeX
@article{Zhang2026,
  author = {Zhang, Biliang and Yuan, Jiejun and Zhang, Haidong and Xu, Wei and Wang, Yongmei and Han, Leiying and Liu, Xiaoyan},
  title = {Preparation, Emulsion Stability and Preliminary Demoulding Evaluation of a Wax-Free Water-Based Soybean Oil-Mineral Oil Concrete Release Agent},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {1429},
  doi = {10.3390/nano16211429}
}
Kostenlos starten →