EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Phosphorus-Modified Mo2C MXene Toward Boosted Oxygen Reduction Reaction for Mg–Air Battery

Canbo Hu, Xinyue Gao, Guoqin Cao, Fanfan Liu iD

Nanomaterials · 28.10.2026 · 16 (21) · 1384

DOI: 10.3390/nano16211384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.10.2026. Verfasst von Canbo Hu und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Center for International Cooperation on Designer Low-Carbon & Environmental Materials (CDLCEM), School of Materials Science and Engineering, Zh…. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mg–air batteries have garnered substantial research attention owing to their high specific capacity, low electrode potential, environmental benignity, and abundant natural magnesium reserves. Nevertheless, sluggish oxygen reduction reaction (ORR) kinetics at the air cathode severely restrict their practical implementation, which necessitates the development of low-cost, high-activity non-precious metal electrocatalysts. Herein, modified Mo2C@P electrocatalysts are successfully synthesized via phosphidation of Mo2C mixed with sodium hypophosphite (NaH2PO2) under thermal treatment. Multiple characterization techniques are employed to systematically investigate the crystal structure, chemical bonding configuration, micromorphology, and ORR electrocatalytic performance of the as-prepared materials. Meanwhile, Mg–air battery evaluations are carried out in 3.5 wt.% aqueous NaCl electrolyte. The results reveal that the Mo2C MXene backbone is well retained. Phosphorus doping is confined to surface modification and is accompanied by the formation of P–O and P–C bonds. The stacked lamellar architecture undergoes surface reconstruction, generating a uniform particulate morphology. The ORR electrocatalytic activity exhibits a volcano-type trend with phosphidation temperature, and Mo2C@P-350 achieves the highest limiting diffusion current density of 2.87 mA cm−2. The Mg–air battery assembled with Mo2C@P-350 delivers outstanding and stable discharge voltages of 1.19 V at 5 mA cm−2 and 1.13 V at 10 mA cm−2, along with optimal rate capability. This work demonstrates that mild-temperature phosphidation represents a reliable surface-engineering strategy for constructing high-performance ORR electrocatalysts.

Schlagwörter

Stichwörter der Autor:innen

Mg–air batteryMo2C MXeneoxygen reduction reactionphosphidationsurface engineering

Autor:innen und Institutionen

  • State Center for International Cooperation on Designer Low-Carbon & Environmental Materials (CDLCEM), School of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China.
  • National Key Laboratory of Special Rare Metal Materials, Zhengzhou University, Zhengzhou 450001, China.

ORCID-Profile: Fanfan Liu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Hu, C., Gao, X., Cao, G., & Liu, F. (2026). Surface Phosphorus-Modified Mo2C MXene Toward Boosted Oxygen Reduction Reaction for Mg–Air Battery. Nanomaterials, 16(21), 1384. https://doi.org/10.3390/nano16211384

Vancouver

Hu C, Gao X, Cao G, Liu F. Surface Phosphorus-Modified Mo2C MXene Toward Boosted Oxygen Reduction Reaction for Mg–Air Battery. Nanomaterials. 2026;16(21):1384. doi:10.3390/nano16211384

BibTeX
@article{Hu2026,
  author = {Hu, Canbo and Gao, Xinyue and Cao, Guoqin and Liu, Fanfan},
  title = {Surface Phosphorus-Modified Mo2C MXene Toward Boosted Oxygen Reduction Reaction for Mg–Air Battery},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {1384},
  doi = {10.3390/nano16211384}
}
Kostenlos starten →