EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Topology-Optimized Kirigami Design of Electrospun BNNS/PVA Composite Films for Flexible Electronics Thermal Management

Yanyan Xu, Bin Xie, Mingxiang Chen, Xin Tang

Nanomaterials · 28.07.2026 · 16 (15) · 926

DOI: 10.3390/nano16150926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.07.2026. Verfasst von Yanyan Xu und 3 weiteren Autor:innen. Beteiligte Einrichtung: China-EU Institute for Clean and Renewable Energy, Huazhong University of Science and Technology, Wuhan 430074, China. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Hubei, Natural Science Foundation of Wuhan, Key R&D Program of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible electronics require thermal-management materials that can efficiently dissipate heat while maintaining mechanical compliance under deformation. In this study, a topology-optimized kirigami BNNS/PVA composite film was developed by combining boron nitride nanosheet incorporation, electrospinning, and thermo-mechanical topology optimization. The electrospun BNNS/PVA network enhanced the in-plane thermal conductivity from 0.19 to 4.63 W/(m·K), while the optimized kirigami architecture improved deformation accommodation by reducing elastic strain energy accumulation. The average temperature and total elastic strain energy were reduced from 86 °C to 53 °C and from 43 J to 11 J, respectively. The optimized structure achieved a maximum stress of 2.39 MPa and a maximum strain of 5.02% and reduced the steady-state temperature by up to 21.27 °C under identical heating conditions. Furthermore, in-plane thermal conductivity was maintained after 300 bending cycles, which provides an effective material–structure design strategy for flexible electronic thermal management applications.

Schlagwörter

Stichwörter der Autor:innen

BNNS/PVA composite filmelectrospinningflexible electronicskirigamithermal managementtopology optimization

Autor:innen und Institutionen

  • China-EU Institute for Clean and Renewable Energy, Huazhong University of Science and Technology, Wuhan 430074, China.
  • School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.

Förderung

  • Natural Science Foundation of Hubei
  • Natural Science Foundation of Wuhan
  • Key R&D Program of Hubei Province

Zitieren

APA

Xu, Y., Xie, B., Chen, M., & Tang, X. (2026). Topology-Optimized Kirigami Design of Electrospun BNNS/PVA Composite Films for Flexible Electronics Thermal Management. Nanomaterials, 16(15), 926. https://doi.org/10.3390/nano16150926

Vancouver

Xu Y, Xie B, Chen M, Tang X. Topology-Optimized Kirigami Design of Electrospun BNNS/PVA Composite Films for Flexible Electronics Thermal Management. Nanomaterials. 2026;16(15):926. doi:10.3390/nano16150926

BibTeX
@article{Xu2026,
  author = {Xu, Yanyan and Xie, Bin and Chen, Mingxiang and Tang, Xin},
  title = {Topology-Optimized Kirigami Design of Electrospun BNNS/PVA Composite Films for Flexible Electronics Thermal Management},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {15},
  pages = {926},
  doi = {10.3390/nano16150926}
}
Kostenlos starten →