Design and Simulation of a Mass Sensor Using Nanoscale Hf0.5Zr0.5O2 Piezoelectric Membranes with Loading Platform
Nanomaterials · 13.07.2026 · 16 (14) · 862
DOI: 10.3390/nano16140862 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 13.07.2026. Verfasst von Zhicong Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Transducer Technology, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Shandong Provincial Natural Science Foundation.
Abstract (Originalsprache)
Resonant mass sensors based on micro/nanoelectromechanical systems (MEMS/NEMS) offer a promising approach for label-free gravimetric detection. However, practical applications often require not only high sensitivity but also improved loading repeatability and reduced dependence on mass loading position. In this work, a suspended resonant mass sensor based on a 10 nm-thick Hf0.5Zr0.5O2 (HZO) piezoelectric film is proposed. A central silicon loading platform is introduced to provide a mechanically robust and spatially uniform sensing region. A Kirchhoff plate model incorporating residual stress is established to analyze the effects of residual stress and platform geometry on the resonant characteristics. The device is fabricated by combining SOI micromachining with wet transfer of the ultrathin HZO film. Laser Doppler vibrometry measurements show a first-order resonant frequency of 1.303 MHz and a quality factor of 342, corresponding to an extracted residual stress of approximately 1.319 GPa. Finite element simulations calibrated by experimental parameters indicate a uniform first-mode displacement distribution and a linear frequency response to added mass from 0 to 1 ng. The obtained mass sensitivities are 150.7 Hz/pg and 166.8 Hz/pg from finite element and analytical models, respectively. The proposed structure provides a feasible route toward repeatable pg-level resonant mass sensing based on ultrathin piezoelectric films.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Transducer Technology, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100190, China.
- School of Electronic, Electrical and Communication Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
- QiLu Aerospace Information Reasearch Institute, Jinan 250101, China.
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China.
- School of Electronics and Integrated Circuits, Aerospace Information Technology University, Jinan 250200, China.
ORCID-Profile: Haoqi Lyu, Wuhao Yang, Chen Ge, Xudong Zou
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Shandong Provincial Natural Science Foundation
Zitieren
APA
Li, Z., Lyu, H., Xie, J., Yang, W., Liu, Z., Qi, Z., Wang, K., Ge, C., & Zou, X. (2026). Design and Simulation of a Mass Sensor Using Nanoscale Hf0.5Zr0.5O2 Piezoelectric Membranes with Loading Platform. Nanomaterials, 16(14), 862. https://doi.org/10.3390/nano16140862
Vancouver
Li Z, Lyu H, Xie J, Yang W, Liu Z, Qi Z, et al. Design and Simulation of a Mass Sensor Using Nanoscale Hf0.5Zr0.5O2 Piezoelectric Membranes with Loading Platform. Nanomaterials. 2026;16(14):862. doi:10.3390/nano16140862
BibTeX
@article{Li2026,
author = {Li, Zhicong and Lyu, Haoqi and Xie, Jiahui and Yang, Wuhao and Liu, Zhuohui and Qi, Zhenxiang and Wang, Kunfeng and Ge, Chen and Zou, Xudong},
title = {Design and Simulation of a Mass Sensor Using Nanoscale Hf0.5Zr0.5O2 Piezoelectric Membranes with Loading Platform},
journal = {Nanomaterials},
year = {2026},
volume = {16},
number = {14},
pages = {862},
doi = {10.3390/nano16140862}
}
EUVIMED