Welding-Induced Heterogeneity Promotes Gradient Nanostructuring in Laser-Welded 304 Stainless Steel Joints
Nanomaterials · 13.07.2026 · 16 (14) · 859
DOI: 10.3390/nano16140859 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 13.07.2026. Verfasst von Tianzhang Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of Liaoning Province, Liaoning Provincial Science and Technology Program, Key Research Project of Liaoning.
Abstract (Originalsprache)
Laser-welded stainless steel joints usually suffer from strain localization and premature failure in the weld metal (WM) due to microstructural heterogeneity introduced during welding. In this work, surface mechanical rolling treatment (SMRT) was applied to laser-welded 304 stainless steel plates to enhance the mechanical performance of the welded joints. Laser welding introduced multiple heterogeneous features in the WM, including local Ni compositional fluctuations, nanoscale oxide particles and heterogeneous grain structures. Among them, the local fluctuation of Ni concentration is considered to play a dominant role by locally modifying the stability of γ-austenite and promoting strain-induced martensitic transformation during SMRT. As a result, the WM exhibited more severe grain refinement and a stronger gradient nanostructure than base metal (BM) under identical processing conditions. The near-surface hardness of the WM reached ~500 Hv, which was noticeably higher than that of the BM. Uniaxial tensile tests revealed that the yield strength increased from ~350 MPa to ~700 MPa, while the ultimate tensile strength reached ~1000 MPa with ~40% elongation. More importantly, the fracture location shifted from the WM to the BM after SMRT. The enhanced martensitic transformation and gradient nanostructure effectively suppressed strain localization and improved the mechanical reliability of the welded joint.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China.
- Institute of Materials Plainification, Liaoning Academic of Materials, Shenyang 110167, China.
- Chongqing Institute of Nanometals, Chongqing 401135, China.
- Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong 999077, China.
ORCID-Profile: Qian Li
Förderung
- Department of Science and Technology of Liaoning Province
- Liaoning Provincial Science and Technology Program
- Key Research Project of Liaoning
Zitieren
APA
Zhao, T., Zhu, J., Deng, H., Wang, C., Zhang, R., Li, Q., Qi, Y., & Sun, Y. (2026). Welding-Induced Heterogeneity Promotes Gradient Nanostructuring in Laser-Welded 304 Stainless Steel Joints. Nanomaterials, 16(14), 859. https://doi.org/10.3390/nano16140859
Vancouver
Zhao T, Zhu J, Deng H, Wang C, Zhang R, Li Q, et al. Welding-Induced Heterogeneity Promotes Gradient Nanostructuring in Laser-Welded 304 Stainless Steel Joints. Nanomaterials. 2026;16(14):859. doi:10.3390/nano16140859
BibTeX
@article{Zhao2026,
author = {Zhao, Tianzhang and Zhu, Junping and Deng, Hongchuan and Wang, Chuanchen and Zhang, Renwei and Li, Qian and Qi, Yingwei and Sun, Yantao},
title = {Welding-Induced Heterogeneity Promotes Gradient Nanostructuring in Laser-Welded 304 Stainless Steel Joints},
journal = {Nanomaterials},
year = {2026},
volume = {16},
number = {14},
pages = {859},
doi = {10.3390/nano16140859}
}
EUVIMED