EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Performance and Uniaxial Compressive Behavior of Nano-TiO2-Modified Coral Concrete

Jiahui Wu, Jiakun Zhu iD, Ao Zhang iD, Xiaochun Fan

Nanomaterials · 04.07.2026 · 16 (13) · 824

DOI: 10.3390/nano16130824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 04.07.2026. Verfasst von Jiahui Wu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Undergraduate Innovation and Entrepreneurship Training Program of Wuhan University of Technology, The National Key Research and Development Program of China, the Guidance Research Project of the Education Department of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical properties and uniaxial compression behavior of nano-TiO2-modified coral concrete (NTCC). Twelve groups of specimens with different nano-TiO2 contents were prepared and cured in freshwater, seawater, and oxalic acid environments. Cube compressive strength, splitting tensile strength, and uniaxial compression tests were conducted according to relevant standards. The results indicate that nano-TiO2 significantly enhances the mechanical performance of coral concrete. The compressive and tensile strengths initially increased and then decreased with increasing nano-TiO2 content, with the maximum strength improvement reaching approximately 22%. Furthermore, increasing the nano-TiO2 dosage reduced the brittle failure characteristics of NTCC under compression. The curing environment had a significant influence on the performance of NTCC. Specimens cured in seawater exhibited superior early-age strength, whereas those cured in freshwater achieved the highest later-age strength. The stress–strain response of NTCC under uniaxial compression can be divided into three stages: the elastic stage, elastoplastic stage, and descending stage. Based on the experimental results, an empirical constitutive model was proposed for NTCC. The predicted stress–strain curves showed good agreement with the experimental results, demonstrating the applicability of the proposed model for describing the compressive behavior of NTCC.

Schlagwörter

Stichwörter der Autor:innen

mechanical propertiesmodified coral concretenano-TiO2stress–strain relationshipwater environment

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China.
  • The College of Post and Telecommunication, Wuhan Institute of Technology, Wuhan 430070, China.

ORCID-Profile: Jiakun Zhu, Ao Zhang

Förderung

  • the Undergraduate Innovation and Entrepreneurship Training Program of Wuhan University of Technology
  • The National Key Research and Development Program of China
  • the Guidance Research Project of the Education Department of Hubei Province
  • Wuhan University of Technology

Zitieren

APA

Wu, J., Zhu, J., Zhang, A., & Fan, X. (2026). Mechanical Performance and Uniaxial Compressive Behavior of Nano-TiO2-Modified Coral Concrete. Nanomaterials, 16(13), 824. https://doi.org/10.3390/nano16130824

Vancouver

Wu J, Zhu J, Zhang A, Fan X. Mechanical Performance and Uniaxial Compressive Behavior of Nano-TiO2-Modified Coral Concrete. Nanomaterials. 2026;16(13):824. doi:10.3390/nano16130824

BibTeX
@article{Wu2026,
  author = {Wu, Jiahui and Zhu, Jiakun and Zhang, Ao and Fan, Xiaochun},
  title = {Mechanical Performance and Uniaxial Compressive Behavior of Nano-TiO2-Modified Coral Concrete},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {824},
  doi = {10.3390/nano16130824}
}
Kostenlos starten →