EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual-Mode Triboelectric and Capacitive Pressure Sensor Based on Anodic Aluminum Oxide

Chung-Yu Yu iD, Chia-Wei Hung, Chin-An Ku iD, Geng-Fu Li, Cheng-Hao Chiu, Chen-Kuei Chung iD

Nanomaterials · 19.06.2026 · 16 (12) · 771

DOI: 10.3390/nano16120771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 19.06.2026. Verfasst von Chung-Yu Yu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, National Cheng Kung University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triboelectric nanogenerators (TENG) show significant potential in pressure sensing by converting mechanical disturbances into electrical signals positively correlated with the magnitude of the applied force, yet their development as practical pressure sensors is severely hindered by the major drawback of only detecting transient mechanical inputs. Additionally, traditional dual-mode pressure sensors have typically required complex multilayer structures and time-consuming fabrication processes. Here, a simple dual-mode pressure sensor of novel structure integrated with TENG and anodic aluminum oxide (AAO) for both dynamic and static pressure detection is proposed. Nanoporous AAO is directly grown on an aluminum substrate to simplify the traditionally complex multi-layer structure of dual-mode pressure sensors. The AAO layer serves a dual functionality by acting as an active triboelectric layer that significantly enhances the triboelectric output performance while concurrently functioning as the capacitive dielectric layer. A polydimethylsiloxane (PDMS) film is employed as the elastic counterpart to pair with the AAO substrate. The influence of PDMS thickness on the charge accumulation and extraction of the TENG mode is investigated to optimize the device output. Under optimal configurations, the streamlined Al-AAO/PDMS sensor demonstrates good sensitivity and linearity (R2 > 0.99) for both dynamic triboelectric voltage (1.05 V/kPa) and static capacitance (5.56 pF/kPa) over a wide sensing range of 1–73 kPa. This dual-mode sensor effectively overcomes the transient limitation of conventional single-mode TENGs and shows significant potential for future smart tactile applications.

Schlagwörter

Stichwörter der Autor:innen

AAOTENGcapacitive sensordual-mode sensorpressure sensor

Autor:innen und Institutionen

  • Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan.

ORCID-Profile: Chung-Yu Yu, Chin-An Ku, Chen-Kuei Chung

Förderung

  • National Science and Technology Council
  • National Cheng Kung University

Zitieren

APA

Yu, C. Y., Hung, C. W., Ku, C. A., Li, G. F., Chiu, C. H., & Chung, C. K. (2026). Dual-Mode Triboelectric and Capacitive Pressure Sensor Based on Anodic Aluminum Oxide. Nanomaterials, 16(12), 771. https://doi.org/10.3390/nano16120771

Vancouver

Yu CY, Hung CW, Ku CA, Li GF, Chiu CH, Chung CK. Dual-Mode Triboelectric and Capacitive Pressure Sensor Based on Anodic Aluminum Oxide. Nanomaterials. 2026;16(12):771. doi:10.3390/nano16120771

BibTeX
@article{Yu2026,
  author = {Yu, Chung-Yu and Hung, Chia-Wei and Ku, Chin-An and Li, Geng-Fu and Chiu, Cheng-Hao and Chung, Chen-Kuei},
  title = {Dual-Mode Triboelectric and Capacitive Pressure Sensor Based on Anodic Aluminum Oxide},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {12},
  pages = {771},
  doi = {10.3390/nano16120771}
}
Kostenlos starten →