EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tin(II) Dithiocarbamate-Derived SnS Nanoparticles for High-Performance Quantum Dot-Sensitized Solar Cells

Inam Vulindlela iD, Athandwe M Paca, Edson L Meyer iD, Mojeed A Agoro iD, Nicholas Rono iD

Nanomaterials · 10.06.2026 · 16 (12) · 718

DOI: 10.3390/nano16120718 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 10.06.2026. Verfasst von Inam Vulindlela und 4 weiteren Autor:innen. Beteiligte Einrichtung: Fort Hare Institute of Technology, University of Fort Hare, Private Bag X1314, Alice 5700, South Africa. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NRF south africa, University of Fort Hare, National Research Foundation of South Africa.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing global demand for renewable energy has intensified the search for high-efficiency and cost-effective solar cell technologies. Quantum dot-sensitized solar cells (QDSSCs) have emerged as promising candidates due to their tunable optoelectronic properties and enhanced light absorption. In this study, SnS quantum dots were synthesized from dithiocarbamate complexes using different ligands, namely m-toluidine (SnS1), aniline (SnS2), and p-toluidine (SnS3), to investigate the influence of precursor chemistry on material properties and device performance. Structural analysis confirmed the formation of an orthorhombic phase for all samples, while morphological studies revealed well-dispersed nanocrystals for SnS1 (5.93 nm), increased aggregation for SnS2 (8.57 nm), and partially fused domains with an intermediate size for SnS3 (6.67 nm). Optical measurements showed bandgap energies of 2.8, 2.2, and 2.7 eV for SnS1, SnS2, and SnS3, respectively, with SnS3 exhibiting reduced charge-recombination behaviour. Photovoltaic devices fabricated using these materials yielded power conversion efficiencies of 3.40, 2.03, and 7.63% for SnS1, SnS2, and SnS3, respectively, with no significant improvement observed for bifacial configurations. The superior performance of SnS3 is attributed to an optimal balance between light absorption, morphology, and charge transport properties, highlighting the critical role of precursor ligand selection in tuning quantum dot characteristics for improved QDSSC performance.

Schlagwörter

Stichwörter der Autor:innen

SnS quantum dotsdithiocarbamate precursorsmonofacial and bifacialpower conversion efficiencyquantum dot-sensitized solar cells

Autor:innen und Institutionen

  • Fort Hare Institute of Technology, University of Fort Hare, Private Bag X1314, Alice 5700, South Africa.
  • Department of Chemical and Earth Science, Chemistry Discipline, University of Fort Hare, Private Bag X1314, Alice 5700, South Africa.
  • Department of Basic Sciences, Tharaka University, Marimanti P.O. Box 193-60215, Kenya.

ORCID-Profile: Inam Vulindlela, Edson L Meyer, Mojeed A Agoro, Nicholas Rono

Förderung

  • NRF south africa
  • University of Fort Hare
  • National Research Foundation of South Africa
  • Govan Mbeki Research & Development Centre (GMRDC) at the University of Fort Hare

Zitieren

APA

Vulindlela, I., Paca, A. M., Meyer, E. L., Agoro, M. A., & Rono, N. (2026). Tin(II) Dithiocarbamate-Derived SnS Nanoparticles for High-Performance Quantum Dot-Sensitized Solar Cells. Nanomaterials, 16(12), 718. https://doi.org/10.3390/nano16120718

Vancouver

Vulindlela I, Paca AM, Meyer EL, Agoro MA, Rono N. Tin(II) Dithiocarbamate-Derived SnS Nanoparticles for High-Performance Quantum Dot-Sensitized Solar Cells. Nanomaterials. 2026;16(12):718. doi:10.3390/nano16120718

BibTeX
@article{Vulindlela2026,
  author = {Vulindlela, Inam and Paca, Athandwe M and Meyer, Edson L and Agoro, Mojeed A and Rono, Nicholas},
  title = {Tin(II) Dithiocarbamate-Derived SnS Nanoparticles for High-Performance Quantum Dot-Sensitized Solar Cells},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {12},
  pages = {718},
  doi = {10.3390/nano16120718}
}
Kostenlos starten →