Anti-Corrosion Properties of Tantalum-Based Composite Films Prepared by Atomic Layer Deposition
Nanomaterials · 01.06.2026 · 16 (11) · 688
DOI: 10.3390/nano16110688 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 01.06.2026. Verfasst von Ge Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials (Ministry of Education), Anhui University of Technology, Ma'an…. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Provincial Department of Education, the industry-academic cooperation project from Hefei ADChem Semi-Tech Co. Ltd, Natural Science Foundation of Anhui Provincial Education Department.
Abstract (Originalsprache)
Reported herein is tantalum (Ta)-based film, including TaN, TaOx, composite TaOxNγ, multilayered TaN/TaOx-(5:5) and TaN/TaOx-(10:10), prepared by atomic layer deposition (ALD) technology via adjusting the sub-cycle of TaN and TaOx films. The influence of different growth parameters on microstructure, crystal form, chemical bonding state and corrosion resistance of Ta-based films was systematically investigated. Representative results include the following: (1) The surface of the Ta-based films prepared by ALD is continuous, dense and smooth, and the root mean square roughness (Rq) of those are TaN: 0.74 nm, TaOx: 0.69 nm, TaOxNγ: 0.55 nm, TaN/TaOx-5:5: 0.56 nm and TaN/TaOx-10:10: 0.77 nm. (2) The TaN film presents a polycrystalline structure with good crystallinity, while the incorporation of oxygen significantly inhibits the crystallinity of the film. (3) Electrochemical tests in 3.5 wt.% NaCl solution and neutral salt spray experiments show that ALD deposition of Ta-based films can significantly improve the corrosion resistance of carbon steel substrates. The order of corrosion resistance of different films is TaOxNγ film > TaN/TaOx multilayer film > TaN film. Among them, the TaOxNγ film exhibited the most excellent corrosion resistance, with a charge transfer resistance (Rct) as high as 24.75 Ω·cm2 and a corrosion current density (Icorr) as low as 1.20 × 10−6 A/cm2, and no obvious rusting phenomenon was observed on the surface of that film after the 2 h neutral salt spray test.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Green Fabrication and Surface Technology of Advanced Metal Materials (Ministry of Education), Anhui University of Technology, Ma'anshan 243002, China.
- Zhejiang Key Laboratory of Advanced Optical Functional Materials and Engineering Research Center for Advanced Infrared Photoelectric Materials of Zhejiang Province, Ningbo University, Ningbo 315211, China.
- Anhui ADChem Semiconductor Technology Company Limited by Shares, Hefei 231200, China.
ORCID-Profile: Qiushun Zou
Förderung
- Anhui Provincial Department of Education
- the industry-academic cooperation project from Hefei ADChem Semi-Tech Co. Ltd
- Natural Science Foundation of Anhui Provincial Education Department
- Anhui ADChem Semi-Tech. Co., Ltd.
Zitieren
APA
Xu, G., Yu, W., Zhang, M., Cai, F., Zou, Q., Li, J., Hu, J., Wan, Z., & Zhang, S. (2026). Anti-Corrosion Properties of Tantalum-Based Composite Films Prepared by Atomic Layer Deposition. Nanomaterials, 16(11), 688. https://doi.org/10.3390/nano16110688
Vancouver
Xu G, Yu W, Zhang M, Cai F, Zou Q, Li J, et al. Anti-Corrosion Properties of Tantalum-Based Composite Films Prepared by Atomic Layer Deposition. Nanomaterials. 2026;16(11):688. doi:10.3390/nano16110688
BibTeX
@article{Xu2026,
author = {Xu, Ge and Yu, Wei and Zhang, Minxuan and Cai, Fei and Zou, Qiushun and Li, Jianheng and Hu, Jing and Wan, Zhixin and Zhang, Shihong},
title = {Anti-Corrosion Properties of Tantalum-Based Composite Films Prepared by Atomic Layer Deposition},
journal = {Nanomaterials},
year = {2026},
volume = {16},
number = {11},
pages = {688},
doi = {10.3390/nano16110688}
}
EUVIMED