EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Carbon-Nanotube-Enabled Low-Threshold Laser Lift-Off for Ultra-Thin Polyimide Films

Junwei Fu, Yachong Xu, Run Bai, Zhenzhen Sun, Yili Zhang, Rui Yang, Zijuan Han, Fanfan Wang, Boyuan Cai

Nanomaterials · 27.04.2026 · 16 (9) · 527

DOI: 10.3390/nano16090527 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 27.04.2026. Verfasst von Junwei Fu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Artificial Intelligence Science and Technology, University of Shanghai for Science and Technology, Shanghai 200093, China. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development program of China, Science and Technology Commission of Shanghai Municipality, Shanghai Municipal Science and Technology Major Project, the Shanghai Frontiers Science Center Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser lift-off (LLO) is a critical process for separating ultra-thin polyimide (PI) films in flexible electronics manufacturing, yet traditional methods often induce thermal and mechanical damage due to high laser energy processing. To address this, we propose a low-threshold LLO method by integrating carbon nanotubes (CNTs) at the interface between a 500 nm PI film and a glass substrate. The interfacial thermal dynamics and separation quality were evaluated through finite element simulations and experimental validations using a 355 nm ultraviolet nanosecond laser. Results demonstrate that CNTs significantly enhance interfacial ultraviolet absorption and promote lateral heat diffusion due to their high axial thermal conductivity. This mechanism broadens the thermal decomposition zone and suppresses vertical heat transfer, thereby reducing the required LLO threshold from 180 mJ/cm2 to 120 mJ/cm2. Furthermore, the integration of CNTs reduces interfacial adhesion and alters the separation dynamics, resulting in the formation of smoother blisters with increased diameters and reduced heights compared to conventional LLO. These effects effectively minimize thermal and mechanical damage to the ultra-thin PI film and its integrated devices. This CNT-assisted LLO approach provides an efficient, low-damage solution for ultra-thin film separation, showing strong potential for advancing high-performance flexible electronics.

Schlagwörter

Stichwörter der Autor:innen

carbon nanotubeslaser ablationlaser lift-offreduced laser threshold

Autor:innen und Institutionen

  • School of Artificial Intelligence Science and Technology, University of Shanghai for Science and Technology, Shanghai 200093, China.
  • Institute of Photonic Chips, University of Shanghai for Science and Technology, Shanghai 200093, China.
  • Shenzhen Han's Semiconductor Equipment Technology Co., Ltd., Shenzhen 518101, China.
  • School of Mechatronic Engineering, Guangdong University of Technology, Guangzhou 510006, China.

Förderung

  • the National Key Research and Development program of China
  • Science and Technology Commission of Shanghai Municipality
  • Shanghai Municipal Science and Technology Major Project, the Shanghai Frontiers Science Center Program
  • National Natural Science Foundation of China
  • National Key Research and Development program of China

Zitieren

APA

Fu, J., Xu, Y., Bai, R., Sun, Z., Zhang, Y., Yang, R., Han, Z., Wang, F., & Cai, B. (2026). Carbon-Nanotube-Enabled Low-Threshold Laser Lift-Off for Ultra-Thin Polyimide Films. Nanomaterials, 16(9), 527. https://doi.org/10.3390/nano16090527

Vancouver

Fu J, Xu Y, Bai R, Sun Z, Zhang Y, Yang R, et al. Carbon-Nanotube-Enabled Low-Threshold Laser Lift-Off for Ultra-Thin Polyimide Films. Nanomaterials. 2026;16(9):527. doi:10.3390/nano16090527

BibTeX
@article{Fu2026,
  author = {Fu, Junwei and Xu, Yachong and Bai, Run and Sun, Zhenzhen and Zhang, Yili and Yang, Rui and Han, Zijuan and Wang, Fanfan and Cai, Boyuan},
  title = {Carbon-Nanotube-Enabled Low-Threshold Laser Lift-Off for Ultra-Thin Polyimide Films},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {9},
  pages = {527},
  doi = {10.3390/nano16090527}
}
Kostenlos starten →