EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Rapid Thermal Annealing (RTA) on the Properties of Indium Oxide Nanostructures

Alina Matei iD, Cosmin Romanițan iD, Iuliana Mihalache iD, Oana Brîncoveanu iD, Vasilica Țucureanu iD

Nanomaterials · 23.04.2026 · 16 (9) · 506

DOI: 10.3390/nano16090506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 23.04.2026. Verfasst von Alina Matei und 4 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Research and Development in Microtechnologies, IMT-Bucharest 126A, Erou Iancu Nicolae Str., 077190 Bucharest, Romania. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present paper, In2O3 NPs were synthesized by a wet-chemical method, in the absence and presence of the surfactant, and deposited as thin films on silicon substrates. After deposition, the films were subjected to rapid thermal annealing (RTA) at 550 °C, 750 °C, and 900 °C, for 300 s, under an inert atmosphere. The correlation between the morphological, structural, and optical characteristics, the wetting capacity of In2O3 films synthesized under different synthesis conditions, and the influence of the RTA treatment are presented. The vibrations of In-O bonds for In2O3 samples were confirmed using FTIR spectroscopy. Structural analysis shows that In2O3 NPs have a cubic crystalline structure, but with the increase in temperature at 900 °C, diffraction peaks characteristic of the tetragonal phase of indium appear, correlated with a decrease in lattice parameters, as a result of the crystallinity. The morphology of the In2O3 samples was studied by SEM, revealing predominantly spherical and uniformly distributed particles with nanometric sizes. The absorption spectra of the In2O3 NPs showed peaks in the ultraviolet region, and the high energy bandgap value of the In2O3 films varied between 3.28 and 4.33 eV, depending on the samples and RTA treatment. The contact angle measurements of In2O3 films determined the wetting capacity of the surface, reflecting changes in surface morphology and structure induced by the RTA process. The results suggest that In2O3 thin films with spherical nanoparticles, good wettability, and percolation can be used for the development of sensors with increased selectivity and sensitivity.

Schlagwörter

Stichwörter der Autor:innen

indium oxideprecipitation methodrapid thermal annealing (RTA)thin films

Autor:innen und Institutionen

  • National Institute for Research and Development in Microtechnologies, IMT-Bucharest 126A, Erou Iancu Nicolae Str., 077190 Bucharest, Romania.

ORCID-Profile: Alina Matei, Cosmin Romanițan, Iuliana Mihalache, Oana Brîncoveanu, Vasilica Țucureanu

Zitieren

APA

Matei, A., Romanițan, C., Mihalache, I., Brîncoveanu, O., & Țucureanu, V. (2026). Influence of Rapid Thermal Annealing (RTA) on the Properties of Indium Oxide Nanostructures. Nanomaterials, 16(9), 506. https://doi.org/10.3390/nano16090506

Vancouver

Matei A, Romanițan C, Mihalache I, Brîncoveanu O, Țucureanu V. Influence of Rapid Thermal Annealing (RTA) on the Properties of Indium Oxide Nanostructures. Nanomaterials. 2026;16(9):506. doi:10.3390/nano16090506

BibTeX
@article{Matei2026,
  author = {Matei, Alina and Romanițan, Cosmin and Mihalache, Iuliana and Brîncoveanu, Oana and Țucureanu, Vasilica},
  title = {Influence of Rapid Thermal Annealing (RTA) on the Properties of Indium Oxide Nanostructures},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {9},
  pages = {506},
  doi = {10.3390/nano16090506}
}
Kostenlos starten →