EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Lithium–Sulfur Battery Performance via Nickel-Doped α-MnO2 Modified Separator

Zhengtao Zhao, Lin Wan, Jiahui Chen iD, Huangqing Ye iD

Nanomaterials · 09.04.2026 · 16 (8) · 449

DOI: 10.3390/nano16080449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 09.04.2026. Verfasst von Zhengtao Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215127, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium–sulfur batteries (LSBs) offer a theoretical energy density of 2600 Wh kg−1 but suffer from the polysulfide shuttle effect, which causes rapid capacity decay and limits practical application. To address this, we developed a bifunctional separator coating using Ni-doped α-MnO2 combined with carbon nanotubes (Ni-MnO2/CNTs). Ni doping induces lattice expansion due to the larger Ni2+ ionic radius, modulating the electronic structure to create more active sites, enhance electrical conductivity, and improve polysulfide adsorption and redox kinetics. The needle-like morphology further strengthens physical/chemical confinement of polysulfides and accelerates conversion reactions. Batteries with the Ni-MnO2/CNTs-modified separator deliver a high-rate capacity of 813 mAh g−1 at 5 C and exhibit a low capacity decay rate of 0.0399% per cycle over 1500 cycles at 2 C. Even under high sulfur loading (∼10 mg cm−2) and lean electrolyte conditions (10 μL mg−1), the cell maintains stable cycling with a decay rate of 0.0929% per cycle over 300 cycles at 0.2 C. This lattice-modulation strategy on commercial separators provides a simple, effective pathway toward high-energy-density, long-life LSBs.

Schlagwörter

Stichwörter der Autor:innen

catalystdopinglithium–sulfur batteriesmanganese dioxide

Autor:innen und Institutionen

  • College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215127, China.
  • College of Electronic Information, Hubei Engineering Institute, Huangshi 435003, China.
  • School of Materials and Energy, Foshan University, Foshan 528200, China.
  • College of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, China.

ORCID-Profile: Jiahui Chen, Huangqing Ye

Zitieren

APA

Zhao, Z., Wan, L., Chen, J., & Ye, H. (2026). Optimization of Lithium–Sulfur Battery Performance via Nickel-Doped α-MnO2 Modified Separator. Nanomaterials, 16(8), 449. https://doi.org/10.3390/nano16080449

Vancouver

Zhao Z, Wan L, Chen J, Ye H. Optimization of Lithium–Sulfur Battery Performance via Nickel-Doped α-MnO2 Modified Separator. Nanomaterials. 2026;16(8):449. doi:10.3390/nano16080449

BibTeX
@article{Zhao2026,
  author = {Zhao, Zhengtao and Wan, Lin and Chen, Jiahui and Ye, Huangqing},
  title = {Optimization of Lithium–Sulfur Battery Performance via Nickel-Doped α-MnO2 Modified Separator},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {449},
  doi = {10.3390/nano16080449}
}
Kostenlos starten →