EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Continuum-Spectral Modeling of Surface Roughness in Electron-Beam-Deposited GO/Ag Nanocomposite Thin Films

Seyedeh Soheila Mousavi, Milad Mousavi, Davood Raoufi, Ágota Drégelyi-Kiss iD

Nanomaterials · 30.03.2026 · 16 (7) · 419

DOI: 10.3390/nano16070419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 30.03.2026. Verfasst von Seyedeh Soheila Mousavi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Faculty of Science, Bu-Ali Sina University, Hamedan 65174, Iran. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the structural, chemical, and morphological characteristics of electron-beam–deposited GO/Ag nanocomposite thin films and establishes a compact continuum–spectral framework for quantifying their post-deposition roughness. Since atomic force microscope (AFM) measurements provide only the final, frozen morphology and no direct temporal information, distinguishing between transient and stationary spectra is not experimentally feasible within the limited AFM wavenumber band. In practice, the accessible power spectral densities (PSDs) show no resolvable deviation from the stationary form, and transient contributions cannot be uniquely identified. The stationary PSD is fitted directly to azimuthally averaged AFM spectra, allowing the smoothing coefficients, noise intensity, correlation length, and crossover scale to be extracted in a fully data-driven manner. The fitted model accurately reproduces the characteristic dual (k−2)/(k−4) spectral scaling and predicts the scan-size dependence of root-mean-square roughness, typically achieving logarithmic determination coefficients above 0.98. The close agreement among parameters obtained from spatially separated sampling points confirms the lateral uniformity of the deposited films and highlights the robustness of the continuum–spectral approach for data-guided roughness control in electron-beam-grown nanocomposite coatings.

Schlagwörter

Stichwörter der Autor:innen

continuum modelingelectron-beam depositionfractal/multifractal analysishurst exponentnanocomposite thin filmspower spectral density (PSD)surface roughness

Autor:innen und Institutionen

  • Department of Physics, Faculty of Science, Bu-Ali Sina University, Hamedan 65174, Iran.
  • Bánki Donát Faculty of Mechanical and Safety Engineering, Óbuda University, 1034 Budapest, Hungary.

ORCID-Profile: Ágota Drégelyi-Kiss

Zitieren

APA

Mousavi, S. S., Mousavi, M., Raoufi, D., & Drégelyi-Kiss, Á. (2026). Continuum-Spectral Modeling of Surface Roughness in Electron-Beam-Deposited GO/Ag Nanocomposite Thin Films. Nanomaterials, 16(7), 419. https://doi.org/10.3390/nano16070419

Vancouver

Mousavi SS, Mousavi M, Raoufi D, Drégelyi-Kiss Á. Continuum-Spectral Modeling of Surface Roughness in Electron-Beam-Deposited GO/Ag Nanocomposite Thin Films. Nanomaterials. 2026;16(7):419. doi:10.3390/nano16070419

BibTeX
@article{Mousavi2026,
  author = {Mousavi, Seyedeh Soheila and Mousavi, Milad and Raoufi, Davood and Drégelyi-Kiss, Ágota},
  title = {Continuum-Spectral Modeling of Surface Roughness in Electron-Beam-Deposited GO/Ag Nanocomposite Thin Films},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {419},
  doi = {10.3390/nano16070419}
}
Kostenlos starten →