EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Inverse Design of Optical Color Routers with Improved Fabrication Compatibility

Sushmit Hossain iD, Zerui Liu, Nishat Tasnim Hiramony iD, Tinghao Hsu, Himaddri Roy, Hongming Zhang, Wei Wu iD

Nanomaterials · 14.02.2026 · 16 (4) · 251

DOI: 10.3390/nano16040251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 14.02.2026. Verfasst von Sushmit Hossain und 6 weiteren Autor:innen. Beteiligte Einrichtung: Ming Hsieh Department of Electrical and Computer Engineering, University of Southern California, Los Angeles, CA 90089, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present a Genetic Algorithm (GA)-based inverse design framework for creating a single-layer, fabrication-compatible dielectric nano-patterned surface that enables efficient color routing in both transmissive and reflective optical systems. Unlike traditional multilayer or absorption-based color filters, the proposed structure employs a fabrication-compatible architecture that spatially routes red, green, and blue light into designated output channels, significantly enhancing light utilization and color fidelity. The design process integrates a GA with full-wave finite-difference time-domain (FDTD) simulations to optimize the structural pillar height distribution, using a figure of merit that simultaneously maximizes optical efficiency and minimizes spectral crosstalk. For CMOS image sensor-scale designs, the nano-patterned surface achieved peak optical efficiencies of 76%, 72%, and 78% for blue, green, and red channels, respectively, with an average efficiency of 75.5%. Parametric studies further revealed the dependence of performance on pillar geometry, refractive index, and unit cell scaling, providing practical design insights for scalable fabrication using nanoimprint or grayscale lithography. Extending the approach to reflective displays, we demonstrate tunable-mirror-based architectures that emulate electrophoretic microcapsules, achieving efficient color reflection and an expanded color gamut beyond the sRGB standard. This single-layer, inverse-designed nano-patterned surface offers a high-performance and fabrication-ready solution for compact, energy-efficient imaging and display technologies.

Schlagwörter

Stichwörter der Autor:innen

CMOS image sensorscolor filtercolor routerinverse designmetasurfacereflective display

Autor:innen und Institutionen

  • Ming Hsieh Department of Electrical and Computer Engineering, University of Southern California, Los Angeles, CA 90089, USA.

ORCID-Profile: Sushmit Hossain, Nishat Tasnim Hiramony, Wei Wu

Zitieren

APA

Hossain, S., Liu, Z., Hiramony, N. T., Hsu, T., Roy, H., Zhang, H., & Wu, W. (2026). Inverse Design of Optical Color Routers with Improved Fabrication Compatibility. Nanomaterials, 16(4), 251. https://doi.org/10.3390/nano16040251

Vancouver

Hossain S, Liu Z, Hiramony NT, Hsu T, Roy H, Zhang H, et al. Inverse Design of Optical Color Routers with Improved Fabrication Compatibility. Nanomaterials. 2026;16(4):251. doi:10.3390/nano16040251

BibTeX
@article{Hossain2026,
  author = {Hossain, Sushmit and Liu, Zerui and Hiramony, Nishat Tasnim and Hsu, Tinghao and Roy, Himaddri and Zhang, Hongming and Wu, Wei},
  title = {Inverse Design of Optical Color Routers with Improved Fabrication Compatibility},
  journal = {Nanomaterials},
  year = {2026},
  volume = {16},
  number = {4},
  pages = {251},
  doi = {10.3390/nano16040251}
}
Kostenlos starten →