EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

First-Principle Study of AlCoCrFeNi High-Entropy Alloys

Andi Huang, Yilong Liu, Jinghao Huang, Jingang Liu, Shiping Yang

Nanomaterials · 23.12.2025 · 16 (1) · 20

DOI: 10.3390/nano16010020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 23.12.2025. Verfasst von Andi Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Xiangtan University Graduate Research and Innovation Project Fund, Xiangtan University Graduate Research and Innovation Project Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AlCoCrFeNi high-entropy alloys (HEAs) are promising materials due to their exceptional mechanical properties and thermal stability. This study employs first-principles calculations based on density functional theory (DFT) to investigate the phase stability and electronic properties of AlCoCrFeNi HEA. The atomic size difference (δ) was determined to be 5.44%, while the mixing enthalpy (ΔHmix) was found to be −14.24 kJ/mol, and the valence electron concentration (VEC) was measured at 7.2, indicating a dual-phase structure consisting of the BCC and B2 phases. The formation energies indicated that the BCC phase exhibits the highest stability under typical conditions. The elastic properties were assessed, revealing Young’s modulus of 250 GPa, a shear modulus of 100 GPa, and a bulk modulus of 169 GPa, which suggest high stiffness. The alloy demonstrated a Poisson’s ratio of 0.25 and a G/B ratio of 0.59, indicating relatively brittle behavior. Microhardness simulations predicted a value of 604 HV0.2, which closely aligns with experimental measurements of 602 HV0.2 at 1300 W laser power, 532 HV0.2 at 1450 W, and 544 HV0.2 at 1600 W. The electronic structure analysis revealed metallic behavior, with the d-orbitals of Co, Fe, and Ni contributing significantly to the electronic states near the Fermi level. These findings offer valuable insights into the phase behavior and mechanical properties of AlCoCrFeNi HEA, which are crucial for the design of high-performance materials suitable for extreme engineering applications.

Schlagwörter

Stichwörter der Autor:innen

AlCoCrFeNi high-entropy alloyselectronic structurefirst-principles calculationsmechanical propertiesphase stability

Autor:innen und Institutionen

  • School of Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China.
  • School of Aeronautical Engineering, Hunan Automotive Engineering Vocational University, Zhuzhou 412001, China.
  • School of Mechanical Engineering, University of South China, Hengyang 421001, China.

Förderung

  • the Xiangtan University Graduate Research and Innovation Project Fund
  • Xiangtan University Graduate Research and Innovation Project Fund

Zitieren

APA

Huang, A., Liu, Y., Huang, J., Liu, J., & Yang, S. (2025). First-Principle Study of AlCoCrFeNi High-Entropy Alloys. Nanomaterials, 16(1), 20. https://doi.org/10.3390/nano16010020

Vancouver

Huang A, Liu Y, Huang J, Liu J, Yang S. First-Principle Study of AlCoCrFeNi High-Entropy Alloys. Nanomaterials. 2025;16(1):20. doi:10.3390/nano16010020

BibTeX
@article{Huang2025,
  author = {Huang, Andi and Liu, Yilong and Huang, Jinghao and Liu, Jingang and Yang, Shiping},
  title = {First-Principle Study of AlCoCrFeNi High-Entropy Alloys},
  journal = {Nanomaterials},
  year = {2025},
  volume = {16},
  number = {1},
  pages = {20},
  doi = {10.3390/nano16010020}
}
Kostenlos starten →