EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward a Correlative Metrology Approach on the Same 2D Flake: Graphene Oxide Case Study—Sample Preparation and Stability Issues

Lydia Chibane iD, Alexandra Delvallée iD, Nolwenn Fleurence iD, Sarah Douri, José Morán-Meza iD, Christian Ulysse iD, François Piquemal iD, Nicolas Feltin iD, Emmanuel Flahaut iD

Nanomaterials · 11.12.2025 · 15 (24) · 1861

DOI: 10.3390/nano15241861 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 11.12.2025. Verfasst von Lydia Chibane und 8 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire National de Métrologie et D'Essais (LNE), 29 Avenue Roger Hennequin, 78190 Trappes, France. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Association Nationale de la Recherche et de la Technologie, European Metrology Programme for Innovation and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although graphene promises a wide range of applications, large-scale production of this material remains complex. One very common way of obtaining graphene is through a reduction in graphene oxide (GO). In order to fully control this production process, it is necessary to obtain data from different techniques, but a comprehensive characterization methodology and associated metrology are currently lacking. Here, we propose tools for substrate selection (in this study, the most appropriate were silicon and silicon dioxide on silicon) and precautions to be taken when setting up a correlative metrology method integrating atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman microscopy/spectroscopy, scanning microwave microscopy (SMM) and scanning thermal microscopy (SThM). Indeed, in order to obtain reliable data for each of these techniques applied to a unique graphene oxide flake, a strategy must be developed and could be implemented to monitor the reduction in GO. Emphasis was placed on the choice of the substrate and on the possible degradations generated by each of the techniques employed, and a running sequence was determined.

Schlagwörter

Stichwörter der Autor:innen

RamanSEMSPMcorrelative metrologygraphene oxide

Autor:innen und Institutionen

  • Laboratoire National de Métrologie et D'Essais (LNE), 29 Avenue Roger Hennequin, 78190 Trappes, France.
  • Centre Inter-Universitaire de Recherche et d'Ingénierie des Matériaux Université de Toulouse, Toulouse INP, Centre National de la Recherche Scientifique, 118 Route de Narbonne, 31062 Toulouse, France.
  • Centre de Nanosciences et de Nanotechnologies, CNRS, 10 Bd Thomas Gobert, 91120 Palaiseau, France.

ORCID-Profile: Lydia Chibane, Alexandra Delvallée, Nolwenn Fleurence, José Morán-Meza, Christian Ulysse, François Piquemal, Nicolas Feltin, Emmanuel Flahaut

Förderung

  • Association Nationale de la Recherche et de la Technologie
  • European Metrology Programme for Innovation and Research

Zitieren

APA

Chibane, L., Delvallée, A., Fleurence, N., Douri, S., Morán-Meza, J., Ulysse, C., Piquemal, F., Feltin, N., & Flahaut, E. (2025). Toward a Correlative Metrology Approach on the Same 2D Flake: Graphene Oxide Case Study—Sample Preparation and Stability Issues. Nanomaterials, 15(24), 1861. https://doi.org/10.3390/nano15241861

Vancouver

Chibane L, Delvallée A, Fleurence N, Douri S, Morán-Meza J, Ulysse C, et al. Toward a Correlative Metrology Approach on the Same 2D Flake: Graphene Oxide Case Study—Sample Preparation and Stability Issues. Nanomaterials. 2025;15(24):1861. doi:10.3390/nano15241861

BibTeX
@article{Chibane2025,
  author = {Chibane, Lydia and Delvallée, Alexandra and Fleurence, Nolwenn and Douri, Sarah and Morán-Meza, José and Ulysse, Christian and Piquemal, François and Feltin, Nicolas and Flahaut, Emmanuel},
  title = {Toward a Correlative Metrology Approach on the Same 2D Flake: Graphene Oxide Case Study—Sample Preparation and Stability Issues},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {24},
  pages = {1861},
  doi = {10.3390/nano15241861}
}
Kostenlos starten →