Effects of the Combined Incorporation of ZnO and TiO2 Nanoparticles on the Mechanical, Rheological, Thermal, and Healing Properties of a Dense Polymeric Asphalt Mixture
Nanomaterials · 26.11.2025 · 15 (23) · 1779
DOI: 10.3390/nano15231779 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 26.11.2025. Verfasst von Jaqueline Wolfart und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Federal University of Santa Catarina, Rua João Pio Duarte Silva, Florianópolis 88040-970, SC, Brazil. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 120 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Council for Scientific and Technological Development, Coordination for the Improvement of Higher Education Personnel.
Abstract (Originalsprache)
This study evaluated the combined incorporation of zinc oxide (ZnO) and titanium dioxide (TiO2) nanoparticles into a styrene–butadiene–styrene (SBS) copolymer-modified asphalt binder, aiming to increase thermal conductivity and healing potential while maintaining rheological performance. Nanocomposites containing ZnO + TiO2 (50/50 wt.%) were produced at dosages of 2–12 wt.% and subjected to the Rolling Thin Film Oven Test (RTFOT), thermal conductivity measurements, viscosity testing, and rheological characterization. A dense-graded asphalt mixture with the optimized dosage was evaluated through wheel-tracking, four-point bending fatigue and healing, and internal heating rate assessment under microwave radiation. The integrated results indicated 8.5 wt.% as the optimal dosage, providing a 106.3% increase in thermal conductivity and improving the high-temperature performance grade (PGH) from 76-XX to 82-XX. Non-recoverable creep compliance (Jnr) decreased by 21.1%, and viscosity at 135 °C increased by 41.8%, remaining below 3.0 Pa·s. In the asphalt mixture, healing capacity increased by 50.7%, and the internal heating rate by 50.0%, while the wheel-tracking rut depth decreased by 13.3%. These findings demonstrate that 8.5 wt.% ZnO + TiO2 simultaneously enhances heat conduction, healing efficiency, and resistance to permanent deformation, offering a promising solution for pavements subjected to high temperatures and heavy traffic.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil Engineering, Federal University of Santa Catarina, Rua João Pio Duarte Silva, Florianópolis 88040-970, SC, Brazil.
ORCID-Profile: Jaqueline Wolfart, João Victor Staub de Melo, Alexandre Luiz Manfro, Breno Salgado Barra, Rafael Cassimiro Barbosa
Förderung
- National Council for Scientific and Technological Development
- Coordination for the Improvement of Higher Education Personnel
Zitieren
APA
Wolfart, J., Staub de Melo, J. V., Manfro, A. L., Barra, B. S., & Barbosa, R. C. (2025). Effects of the Combined Incorporation of ZnO and TiO2 Nanoparticles on the Mechanical, Rheological, Thermal, and Healing Properties of a Dense Polymeric Asphalt Mixture. Nanomaterials, 15(23), 1779. https://doi.org/10.3390/nano15231779
Vancouver
Wolfart J, Staub de Melo JV, Manfro AL, Barra BS, Barbosa RC. Effects of the Combined Incorporation of ZnO and TiO2 Nanoparticles on the Mechanical, Rheological, Thermal, and Healing Properties of a Dense Polymeric Asphalt Mixture. Nanomaterials. 2025;15(23):1779. doi:10.3390/nano15231779
BibTeX
@article{Wolfart2025,
author = {Wolfart, Jaqueline and Staub de Melo, João Victor and Manfro, Alexandre Luiz and Barra, Breno Salgado and Barbosa, Rafael Cassimiro},
title = {Effects of the Combined Incorporation of ZnO and TiO2 Nanoparticles on the Mechanical, Rheological, Thermal, and Healing Properties of a Dense Polymeric Asphalt Mixture},
journal = {Nanomaterials},
year = {2025},
volume = {15},
number = {23},
pages = {1779},
doi = {10.3390/nano15231779}
}
EUVIMED