EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Atomic Layer Deposition for Perovskite Solar Cells: Interface Engineering, Stability Enhancement, and Future Prospects

Xuanya Liao, Youquan Jiang, Lirong Wang, Jiulong Li, Zhuoran Hou, Kwang Leong Choy, Zhaodong Li

Nanomaterials · 04.11.2025 · 15 (21) · 1674

DOI: 10.3390/nano15211674 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Nanomaterials, online erschienen am 04.11.2025. Verfasst von Xuanya Liao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits, Wuhan University, Wuhan 430072, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 211 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kunshan Municipal Government research funding, Natural Science Foundation of Chongqing, Natural Science Foundation of Chongqing, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite solar cells (PSCs) have achieved rapid progress in recent years owing to their high-power conversion efficiency (PCE), low cost, and processability. However, poor device stability and carrier recombination remain significant obstacles to further development. Atomic layer deposition (ALD), with its atomic-level control over film thickness, excellent uniformity, and interfacial engineering capability, has attracted considerable attention in PSC research. This review summarizes the applications of ALD in PSCs, including low-temperature synthesis (typically below 350 °C), thickness and composition control (approximately 1 nm per 10 ALD cycles), defect passivation, encapsulation (water vapor transmission rates as low as 10−6 g·m−2·day−1 under optimized conditions), and tandem devices. In addition, the mechanisms by which ALD enhances device efficiency and stability are discussed in depth, and the challenges and future prospects of this technique are analyzed.

Schlagwörter

Stichwörter der Autor:innen

atomic layer depositioninterface engineeringperovskite solar cellsstability

Autor:innen und Institutionen

  • School of Integrated Circuits, Wuhan University, Wuhan 430072, China.
  • Suzhou Key Laboratory of Advanced Sustainable Materials and Technologies, The Environmental Research Center, Division of Natural and Applied Sciences, Duke Kunshan University, Kunshan 215316, China.
  • The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China.
  • School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072, China.

Förderung

  • Kunshan Municipal Government research funding
  • Natural Science Foundation of Chongqing
  • Natural Science Foundation of Chongqing, China

Zitieren

APA

Liao, X., Jiang, Y., Wang, L., Li, J., Hou, Z., Choy, K. L., & Li, Z. (2025). Atomic Layer Deposition for Perovskite Solar Cells: Interface Engineering, Stability Enhancement, and Future Prospects. Nanomaterials, 15(21), 1674. https://doi.org/10.3390/nano15211674

Vancouver

Liao X, Jiang Y, Wang L, Li J, Hou Z, Choy KL, et al. Atomic Layer Deposition for Perovskite Solar Cells: Interface Engineering, Stability Enhancement, and Future Prospects. Nanomaterials. 2025;15(21):1674. doi:10.3390/nano15211674

BibTeX
@article{Liao2025,
  author = {Liao, Xuanya and Jiang, Youquan and Wang, Lirong and Li, Jiulong and Hou, Zhuoran and Choy, Kwang Leong and Li, Zhaodong},
  title = {Atomic Layer Deposition for Perovskite Solar Cells: Interface Engineering, Stability Enhancement, and Future Prospects},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {21},
  pages = {1674},
  doi = {10.3390/nano15211674}
}
Kostenlos starten →