EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optical Waveguide-Pair Design for CMOS-Compatible Hybrid III-V-on-Silicon Quantum Dot Lasers

Peter Raymond Smith iD, Konstantinos Papatryfonos iD, David R Selviah iD

Nanomaterials · 28.10.2025 · 15 (21) · 1645

DOI: 10.3390/nano15211645 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.10.2025. Verfasst von Peter Raymond Smith und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic and Electrical Engineering, University College London, London WC1E 7JE, UK. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020, L3MATRIX, the Horizon 2020 Framework Programme of the European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of compact, energy-efficient integrated lasers operating at 1.3 µm re-mains a critical focus in silicon photonics, essential for advancing data communications and optical interconnect technologies. This paper presents a numerical study of distributed Bragg reflector (DBR) hybrid III-V-on-silicon lasers, analyzing design trade-offs and optimization strategies based on supermode theory. The III-V section of the design incorporates InAs/(Al)GaAs quantum dots (QDs), which offer improved temperature insensitivity at the cost of more complex III-V/Si optical coupling, due to the high refractive index of (Al)GaAs. Consequently, many current laser designs rely on silicon waveguides with a thickness exceeding 220 nm, which helps coupling but limits their compatibility with standard CMOS technologies. To address this challenge, we perform detailed simulations focusing on 220-nm-thick silicon waveguides. We first examine how the mode profiles jointly depend on the silicon waveguide dimensions and the geometry and composition of the III-V stack. Based on this analysis, we propose a novel epitaxial design that enables effective III-V/Si coupling, with the optical mode strongly confined within the III-V waveguide in the gain section and efficiently transferred to the silicon waveguide in the passive sections. Moreover, the final design is shown to be robust to fabrication-induced deviations from nominal parameters.

Schlagwörter

Stichwörter der Autor:innen

design methodologydistributed Bragg reflector laserevanescent couplinghybrid laseroverlap integralquantum dot lasersilicon photonicssupermode theorytolerancetrade-off

Autor:innen und Institutionen

  • Department of Electronic and Electrical Engineering, University College London, London WC1E 7JE, UK.
  • Institute of Electronics, Microelectronics and Nanotechnology (IEMN), UMR CNRS 8520, University of Lille, Avenue Poincare, 59650 Villeneuve of Ascq, France.

ORCID-Profile: Peter Raymond Smith, Konstantinos Papatryfonos, David R Selviah

Förderung

  • Horizon 2020
  • L3MATRIX
  • the Horizon 2020 Framework Programme of the European Union
  • the EPSRC

Zitieren

APA

Smith, P. R., Papatryfonos, K., & Selviah, D. R. (2025). Optical Waveguide-Pair Design for CMOS-Compatible Hybrid III-V-on-Silicon Quantum Dot Lasers. Nanomaterials, 15(21), 1645. https://doi.org/10.3390/nano15211645

Vancouver

Smith PR, Papatryfonos K, Selviah DR. Optical Waveguide-Pair Design for CMOS-Compatible Hybrid III-V-on-Silicon Quantum Dot Lasers. Nanomaterials. 2025;15(21):1645. doi:10.3390/nano15211645

BibTeX
@article{Smith2025,
  author = {Smith, Peter Raymond and Papatryfonos, Konstantinos and Selviah, David R},
  title = {Optical Waveguide-Pair Design for CMOS-Compatible Hybrid III-V-on-Silicon Quantum Dot Lasers},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {21},
  pages = {1645},
  doi = {10.3390/nano15211645}
}
Kostenlos starten →