Influence of Selenium Pressure on Properties of AgInGaSe2 Thin Films and Their Application to Solar Cells
Nanomaterials · 24.07.2025 · 15 (15) · 1146
DOI: 10.3390/nano15151146 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 24.07.2025. Verfasst von Xianfeng Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Guangzhou College of Technology and Business, Sanshui Compus, Foshan 528137, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation of China.
Abstract (Originalsprache)
A wide-bandgap AgInGaSe2 (AIGS) thin film was fabricated using molecular beam epitaxy (MBE) via a three-stage method. The influence of Selenium (Se) pressure on the properties of AIGS films and solar cells was studied in detail. It was found that Se pressure played a very important role during the fabrication process, whereby Se pressure was varied from 0.8 × 10−3 Torr to 2.5 × 10−3 Torr in order to specify the effect of Se pressure. A two-stage mechanism during the production of AIGS solar cells was concluded according to the experimental results. With an increase in Se pressure, the grain size significantly increased due to the supply of the Ag–Se phase; the superficial roughness also increased. When Se pressure was increased to 2.1 × 10−3 Torr, the morphology of AIGS changed abruptly and clear grain boundaries were observed with a typical grain size of over 1.5 μm. AIGS films fabricated with a low Se pressure tended to show a higher bandgap due to the formation of anti-site defects such as In and Ga on Ag sites as a result of the insufficient Ag–Se phase. With an increase in Se pressure, the crystallinity of the AIGS film changed from the (220)-orientation to the (112)-orientation. When Se pressure was 2.1 × 10−3 Torr, the AIGS solar cell demonstrated its best performance of about 9.6% (Voc: 810.2 mV; Jsc: 16.7 mA/cm2; FF: 71.1%) with an area of 0.2 cm2.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangzhou College of Technology and Business, Sanshui Compus, Foshan 528137, China.
- State Key Laboratory of Nuclear Physics and Technology, School of Physics, Peking University, Beijing 100871, China.
- School of Computer Science and Artificial Intelligence, Foshan University, Foshan 528231, China.
- Aenerx-Technology Co., Ltd., Hangzhou 311121, China.
ORCID-Profile: Xianfeng Zhang
Förderung
- National Science Foundation of China
Zitieren
APA
Zhang, X., Fu, E., Lu, Y., & Yang, Y. (2025). Influence of Selenium Pressure on Properties of AgInGaSe2 Thin Films and Their Application to Solar Cells. Nanomaterials, 15(15), 1146. https://doi.org/10.3390/nano15151146
Vancouver
Zhang X, Fu E, Lu Y, Yang Y. Influence of Selenium Pressure on Properties of AgInGaSe2 Thin Films and Their Application to Solar Cells. Nanomaterials. 2025;15(15):1146. doi:10.3390/nano15151146
BibTeX
@article{Zhang2025,
author = {Zhang, Xianfeng and Fu, Engang and Lu, Yong and Yang, Yang},
title = {Influence of Selenium Pressure on Properties of AgInGaSe2 Thin Films and Their Application to Solar Cells},
journal = {Nanomaterials},
year = {2025},
volume = {15},
number = {15},
pages = {1146},
doi = {10.3390/nano15151146}
}
EUVIMED