Bridging Additive Manufacturing and Electronics Printing in the Age of AI
Nanomaterials · 31.05.2025 · 15 (11) · 843
DOI: 10.3390/nano15110843 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Nanomaterials, online erschienen am 31.05.2025. Verfasst von Jihua Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 178 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Energy, UT-Battelle, LLC.
Abstract (Originalsprache)
Printing techniques have been instrumental in developing flexible and stretchable electronics, including organic light-emitting diode displays, organic thin film transistor arrays, electronic skins, organic electrochemical transistors for biosensors and neuromorphic computing, as well as flexible solar cells with low-cost processes such as inkjet printing, ultrasonic nozzle, roll-to-roll coating. The rise of additive manufacturing provides even more opportunities to print electronics in automated and customizable ways. In this work, we will review the current technologies of printing electronics (including printed batteries, supercapacitors, fuel cells, and sensors), especially with 3D printing. In this age of ongoing AI revolution, the application of AI algorithms is discussed in terms of combining them with 3D printing and electronics printing for a future with automated optimization, sustainable design, and customizable and scalable manufacturing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA.
- ICSPI, 280 Joseph St, Kitchener, ON N2G 4Z5, Canada.
- Chemical Engineering, University of Tennessee at Knoxville, Knoxville, TN 37996, USA.
ORCID-Profile: Jihua Chen, Yue Yuan
Förderung
- United States Department of Energy
- UT-Battelle, LLC
Zitieren
APA
Chen, J., Yuan, Y., Wang, Q., Wang, H., & Advincula, R. C. (2025). Bridging Additive Manufacturing and Electronics Printing in the Age of AI. Nanomaterials, 15(11), 843. https://doi.org/10.3390/nano15110843
Vancouver
Chen J, Yuan Y, Wang Q, Wang H, Advincula RC. Bridging Additive Manufacturing and Electronics Printing in the Age of AI. Nanomaterials. 2025;15(11):843. doi:10.3390/nano15110843
BibTeX
@article{Chen2025,
author = {Chen, Jihua and Yuan, Yue and Wang, Qianshu and Wang, Hanyu and Advincula, Rigoberto C},
title = {Bridging Additive Manufacturing and Electronics Printing in the Age of AI},
journal = {Nanomaterials},
year = {2025},
volume = {15},
number = {11},
pages = {843},
doi = {10.3390/nano15110843}
}
EUVIMED