EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving Nanosilica Fluidization by Premixing with Geldart A and B Particles: A Detailed Region-Wise Study

Syed Sadiq Ali iD, S K Safdar Hossain iD, Mohammad E Ali Mohsin iD, Mohammad Asif iD

Nanomaterials · 29.05.2025 · 15 (11) · 822

DOI: 10.3390/nano15110822 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 29.05.2025. Verfasst von Syed Sadiq Ali und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, King Faisal University, P.O. Box 380, Al-Ahsa 31982, Saudi Arabia. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Kingdom of Saudi Arabi.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrafine nanosilica exhibits a strong tendency to form agglomerates, with sizes often several orders of magnitude larger than the primary particles. This agglomeration severely impairs its effectiveness in fluidization and other applications requiring uniform powder dispersion. To address this issue, the present study employed an assisted fluidization technique involving premixing of nanosilica with small amounts of external inert particles. The aim was to disrupt the structural integrity of the agglomerates by altering the inter-agglomerate force equilibrium. Two types of inert silica (SiO2) particles, representing Geldart groups A (finer) and B (coarser), were individually premixed with the nanosilica in different proportions. This strategy led to a significant reduction in both the minimum fluidization velocity (Umf) and fluidization hysteresis. Moreover, a clear vertical segregation pattern emerged within the fluidized bed: the finer Group A particles (S-A) primarily enhanced fluidization in the upper and middle regions, while the coarser Group B particles (S-B) were more effective in the middle and lower regions. Interestingly, even at low premixing proportions, a significant volumetric contraction (up to 40%) of the premixed nanosilica bed was observed, which confirmed the disruption of the inter-agglomerate force balance within the nanosilica, contributing to enhanced fluidization behavior.

Schlagwörter

Stichwörter der Autor:innen

Geldart groupassistancecontractionfluidizationhydrodynamicsnanosilicaparticle premixing

Autor:innen und Institutionen

  • Department of Chemical Engineering, King Faisal University, P.O. Box 380, Al-Ahsa 31982, Saudi Arabia.
  • Department of Chemical Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia.

ORCID-Profile: Syed Sadiq Ali, S K Safdar Hossain, Mohammad E Ali Mohsin, Mohammad Asif

Förderung

  • Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University
  • Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Kingdom of Saudi Arabi

Zitieren

APA

Ali, S. S., Hossain, S. K. S., Mohsin, M. E. A., & Asif, M. (2025). Improving Nanosilica Fluidization by Premixing with Geldart A and B Particles: A Detailed Region-Wise Study. Nanomaterials, 15(11), 822. https://doi.org/10.3390/nano15110822

Vancouver

Ali SS, Hossain SKS, Mohsin MEA, Asif M. Improving Nanosilica Fluidization by Premixing with Geldart A and B Particles: A Detailed Region-Wise Study. Nanomaterials. 2025;15(11):822. doi:10.3390/nano15110822

BibTeX
@article{Ali2025,
  author = {Ali, Syed Sadiq and Hossain, S K Safdar and Mohsin, Mohammad E Ali and Asif, Mohammad},
  title = {Improving Nanosilica Fluidization by Premixing with Geldart A and B Particles: A Detailed Region-Wise Study},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {11},
  pages = {822},
  doi = {10.3390/nano15110822}
}
Kostenlos starten →