EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Spacer Loss upon 2D Ruddlesden–Popper Halide Perovskite Annealing Raises Film Properties and Solar Cell Performances

Tao Zhu, Min Liu, Marie Cresp, Daming Zheng, Karol Vegso, Peter Siffalovic iD, Thierry Pauporté iD

Nanomaterials · 16.05.2025 · 15 (10) · 750

DOI: 10.3390/nano15100750 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 16.05.2025. Verfasst von Tao Zhu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institut de Recherche de Chimie Paris (IRCP), Chimie ParisTech, PSL Research University, CNRS, UMR8247, 11 rue P. et M. Curie, F-75005 Paris, France. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, CSC, ChemSta project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Using reduced-dimensional halide perovskites is emerging as a promising strategy for enhancing the stability of optoelectronic devices such as solar cells, even if their performances remain a step below those of the 3D halide perovskites. Two-dimensional Ruddlesden–Popper (2D-RP) structures are characterized by the n parameter that represents the number of PbI6 layers in the spacer-separated perovskite slabs. The present study focuses on formamidinium (FA)-based 2D-RP type perovskites denoted as PMA2FAn−1PbnI3n+1 (PMA = Phenylmethylammonium or benzylammonium). We investigate the effect of n on the one step growth mechanism and the film morphology, microstructure, phase purity, and optoelectronic properties. Our findings demonstrate that the average n is not only determined by the initial spacer content in the precursor solution but also by the thermal annealing process that leads to a partial spacer loss. Depending on n, perovskite solar cells achieving a power conversion efficiency up to 21%, coupled with enhanced film stability compared to 3D perovskites have been prepared. By using MACl additive and an excess of PbI2 in the perovskite precursor solution, we have been able to achieve high efficiency and to stabilize the n = 5 perovskite solar cells. This research represents a significant stride in comprehending the formation of FA-based layered perovskites through one-step sequential deposition, enabling control over their phase distribution, composition, and orientation.

Schlagwörter

Stichwörter der Autor:innen

Ruddlesden–Popper halide perovskitedeprotonation and volatilizationphenylmethylammoniumprecursor solution compositionsolar cells

Autor:innen und Institutionen

  • Institut de Recherche de Chimie Paris (IRCP), Chimie ParisTech, PSL Research University, CNRS, UMR8247, 11 rue P. et M. Curie, F-75005 Paris, France.
  • Institute of Physics, Slovak Academy of Sciences, Dubravska Cesta 9, 84511 Bratislava, Slovakia.
  • Center for Advanced Materials and Applications (CEMEA), Slovak Academy of Sciences, Dubravska Cesta 5807/9, 84511 Bratislava, Slovakia.

ORCID-Profile: Peter Siffalovic, Thierry Pauporté

Förderung

  • Agence Nationale de la Recherche
  • CSC
  • ChemSta project

Zitieren

APA

Zhu, T., Liu, M., Cresp, M., Zheng, D., Vegso, K., Siffalovic, P., & Pauporté, T. (2025). Spacer Loss upon 2D Ruddlesden–Popper Halide Perovskite Annealing Raises Film Properties and Solar Cell Performances. Nanomaterials, 15(10), 750. https://doi.org/10.3390/nano15100750

Vancouver

Zhu T, Liu M, Cresp M, Zheng D, Vegso K, Siffalovic P, et al. Spacer Loss upon 2D Ruddlesden–Popper Halide Perovskite Annealing Raises Film Properties and Solar Cell Performances. Nanomaterials. 2025;15(10):750. doi:10.3390/nano15100750

BibTeX
@article{Zhu2025,
  author = {Zhu, Tao and Liu, Min and Cresp, Marie and Zheng, Daming and Vegso, Karol and Siffalovic, Peter and Pauporté, Thierry},
  title = {Spacer Loss upon 2D Ruddlesden–Popper Halide Perovskite Annealing Raises Film Properties and Solar Cell Performances},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {10},
  pages = {750},
  doi = {10.3390/nano15100750}
}
Kostenlos starten →