Ti-Doped, Mn-Based Polyanionic Compounds of Na4Fe1.2Mn1.8(PO4)2P2O7 for Sodium-Ion Battery Cathode
Nanomaterials · 11.04.2025 · 15 (8) · 581
DOI: 10.3390/nano15080581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 11.04.2025. Verfasst von Hualin Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Key Laboratory of Efficient Conversion and Solid-State Storage of Hydrogen & Electricity of Anhui Provin…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jinan Independent Innovative Team, Major Program of Shandong Province Natural Science Foundation.
Abstract (Originalsprache)
Na4Fe3(PO4)2P2O7 (NFPP) is recognized as a prospective electrode for sodium-ion batteries (SIBs) because of its structure stability, economic viability and environmental friendliness. Nevertheless, its commercialization is constrained by low operating voltage and limited theoretical capacity, which result in a power density significantly inferior to that of LiFePO4. To address these limitations, in this work, we first designed and synthesized a series of Mn-doped NFPP to enhance its operating voltage, inspired by the successful design of LiFe1-xMnxPO4 cathodes. This approach was implemented to enhance the operating voltage of the material. Subsequently, the optimized Na4Fe1.2Mn1.8(PO4)2P2O7 (1.8Mn-NFMPP) sample was selected for further Ti-doped modification to enhance its cycle durability and rate performance. The final Mn/Ti co-doped Na4Fe1.2Mn1.7Ti0.1(PO4)2P2O7 (0.1Ti-NFMTPP) material exhibited a high operating voltage of ~3.6 V (vs. Na+/Na) in a half cell, with an outstanding reversible capacity of 122.9 mAh g−1 at 0.1 C and remained at 90.6% capacity retention after 100 cycles at 0.5 C. When assembled into a coin-type full cell employing a commercial hard carbon anode, the optimized cathode material exhibited an initial capacity of 101.7 mAh g−1, retaining 86.9% capacity retention over 50 cycles at 0.1 C. These results illustrated that optimal Mn/Ti co-doping is an effective methodology to boost the electrochemical behavior of NFPP materials, achieving mitigation of the Jahn–Teller effect on the Mn3+ and Mn dissolution problem, thereby significantly improving structural stability and cycling performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Key Laboratory of Efficient Conversion and Solid-State Storage of Hydrogen & Electricity of Anhui Province, Anhui University of Technology, Ma'anshan 243002, China.
- School of Materials Science & Engineering, University of Jinan, Jinan 250022, China.
ORCID-Profile: Hualin Li, Gang Pang, Changzhou Yuan
Förderung
- National Natural Science Foundation of China
- Jinan Independent Innovative Team
- Major Program of Shandong Province Natural Science Foundation
- Science and Technology Program of the University of Jinan
Zitieren
APA
Li, H., Pang, G., Zhang, W., Zhang, Q., Hou, L., & Yuan, C. (2025). Ti-Doped, Mn-Based Polyanionic Compounds of Na4Fe1.2Mn1.8(PO4)2P2O7 for Sodium-Ion Battery Cathode. Nanomaterials, 15(8), 581. https://doi.org/10.3390/nano15080581
Vancouver
Li H, Pang G, Zhang W, Zhang Q, Hou L, Yuan C. Ti-Doped, Mn-Based Polyanionic Compounds of Na4Fe1.2Mn1.8(PO4)2P2O7 for Sodium-Ion Battery Cathode. Nanomaterials. 2025;15(8):581. doi:10.3390/nano15080581
BibTeX
@article{Li2025,
author = {Li, Hualin and Pang, Gang and Zhang, Weilong and Zhang, Qingan and Hou, Linrui and Yuan, Changzhou},
title = {Ti-Doped, Mn-Based Polyanionic Compounds of Na4Fe1.2Mn1.8(PO4)2P2O7 for Sodium-Ion Battery Cathode},
journal = {Nanomaterials},
year = {2025},
volume = {15},
number = {8},
pages = {581},
doi = {10.3390/nano15080581}
}
EUVIMED