Intensity Modulation Effects on Ultrafast Laser Ablation Efficiency and Defect Formation in Fused Silica
Nanomaterials · 28.02.2025 · 15 (5) · 377
DOI: 10.3390/nano15050377 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 28.02.2025. Verfasst von Dai Yoshitomi und 5 weiteren Autor:innen. Beteiligte Einrichtung: National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba 305-8568, Japan. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: New Energy and Industrial Technology Development Organization, Amada Foundation.
Abstract (Originalsprache)
Ultrafast laser processing is a critical technology for micro- and nano-fabrication due to its ability to minimize heat-affected zones. The effects of intensity variation on the ultrafast laser ablation of fused silica were investigated to gain fundamental insights into the dynamic modulation of pulse intensity. This study revealed significant enhancement in ablation efficiency for downward ramp intensity modulation compared to the upward ramp. This effect was independent of the repetition rate ranging from 100 Hz to 1 MHz, which suggested that it originates from persistent residual effects of preceding pulses. Photoluminescence experiments indicated that the observed effect is primarily attributed to the dynamic reduction in the ablation threshold caused by the formation of defects such as non-bridging oxygen hole centers. The correlation between the sequence of intensity-modulated pulses and defect formation has been clarified. The knowledge of these correlations, combined with machine learning-based optimization methods, is useful for the optimization of the throughput and quality of ultrafast laser processing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba 305-8568, Japan.
- The Institute for Solid State Physics, The University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa 277-8581, Japan.
ORCID-Profile: Dai Yoshitomi, Hiroshi Ogawa
Förderung
- New Energy and Industrial Technology Development Organization
- Amada Foundation
Zitieren
APA
Yoshitomi, D., Takada, H., Kinugasa, S., Ogawa, H., Kobayashi, Y., & Narazaki, A. (2025). Intensity Modulation Effects on Ultrafast Laser Ablation Efficiency and Defect Formation in Fused Silica. Nanomaterials, 15(5), 377. https://doi.org/10.3390/nano15050377
Vancouver
Yoshitomi D, Takada H, Kinugasa S, Ogawa H, Kobayashi Y, Narazaki A. Intensity Modulation Effects on Ultrafast Laser Ablation Efficiency and Defect Formation in Fused Silica. Nanomaterials. 2025;15(5):377. doi:10.3390/nano15050377
BibTeX
@article{Yoshitomi2025,
author = {Yoshitomi, Dai and Takada, Hideyuki and Kinugasa, Shinichi and Ogawa, Hiroshi and Kobayashi, Yohei and Narazaki, Aiko},
title = {Intensity Modulation Effects on Ultrafast Laser Ablation Efficiency and Defect Formation in Fused Silica},
journal = {Nanomaterials},
year = {2025},
volume = {15},
number = {5},
pages = {377},
doi = {10.3390/nano15050377}
}
EUVIMED