EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermally Conductive Shape-Stabilized Phase Change Materials Enabled by Paraffin Wax and Nanoporous Structural Expanded Graphite

Yilin Zhao, Shuhui Huang, Zhaoguo Jin, Zhongnan Xie, Hong Guo, Haofeng Xie

Nanomaterials · 12.01.2025 · 15 (2) · 110

DOI: 10.3390/nano15020110 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 12.01.2025. Verfasst von Yilin Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Nonferrous Metals and Processes, GRIMN Group Co., Ltd., Beijing 100088, China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Innovation Fund of GRIMAT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Paraffin wax (PW) has significant potential for spacecraft thermal management, but low thermal conductivity and leakage issues make it no longer sufficient for the requirements of evolving spacecraft thermal control systems. Although free-state expanded graphite (EG) as a thermal conductivity enhancer can ameliorate the above problems, it remains challenging to achieve higher thermal conductivity (K) (>8 W/(m·K)) at filler contents below 10 wt.% and to mitigate the leakage problem. Two preparations of thermally conductive shape-stabilized PW/EG composites, using the pressure-induced method and prefabricated skeleton method, were designed in this paper. The expanded graphite formed a nanoscale porous structure by different methods, which enhanced the capillary action between the graphite flake layers, improved the adsorption and encapsulation of EG, and alleviated the leakage problem. The thermal conductivity and the latent heat of the phase-change materials (PCM) prepared by the two methods mentioned above are 9.99 W/(m·K), 10.70 W/(m·K) and 240.06 J/g, 231.67 J/g, respectively, at EG loading by 10 wt.%, and the residual mass fraction was greater than 99% after 50 cycles of high and low temperature. In addition, due to the excellent thermal management capability of PW/EG, the operating temperature of electronic components can be stably maintained at 68–71 °C for about 15 min and the peak temperature can be reduced by at least 23 °C when the heating power of the electronic components is 10 w. These provide novel and cost-effective methods to further improve the management capability of spacecraft thermal control systems.

Schlagwörter

Stichwörter der Autor:innen

expanded graphitelatent heatnanoporous structureparaffin waxshape-stabilized phase change materialthermal conductivity

Autor:innen und Institutionen

  • State Key Laboratory of Nonferrous Metals and Processes, GRIMN Group Co., Ltd., Beijing 100088, China.
  • GRIMAT Engineering Institute Co., Ltd., Beijing 101407, China.
  • General Research Institute for Nonferrous Metals, Beijing 100088, China.
  • Haiwing Aerospace Materials Research Institute Co., Ltd., Suzhou 215002, China.

Förderung

  • Science and Technology Innovation Fund of GRIMAT

Zitieren

APA

Zhao, Y., Huang, S., Jin, Z., Xie, Z., Guo, H., & Xie, H. (2025). Thermally Conductive Shape-Stabilized Phase Change Materials Enabled by Paraffin Wax and Nanoporous Structural Expanded Graphite. Nanomaterials, 15(2), 110. https://doi.org/10.3390/nano15020110

Vancouver

Zhao Y, Huang S, Jin Z, Xie Z, Guo H, Xie H. Thermally Conductive Shape-Stabilized Phase Change Materials Enabled by Paraffin Wax and Nanoporous Structural Expanded Graphite. Nanomaterials. 2025;15(2):110. doi:10.3390/nano15020110

BibTeX
@article{Zhao2025,
  author = {Zhao, Yilin and Huang, Shuhui and Jin, Zhaoguo and Xie, Zhongnan and Guo, Hong and Xie, Haofeng},
  title = {Thermally Conductive Shape-Stabilized Phase Change Materials Enabled by Paraffin Wax and Nanoporous Structural Expanded Graphite},
  journal = {Nanomaterials},
  year = {2025},
  volume = {15},
  number = {2},
  pages = {110},
  doi = {10.3390/nano15020110}
}
Kostenlos starten →