Silver-Doped Reduced Graphene Oxide/PANI-DBSA-PLA Composite 3D-Printed Supercapacitors
Nanomaterials · 20.10.2024 · 14 (20) · 1681
DOI: 10.3390/nano14201681 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 20.10.2024. Verfasst von Claudia Cirillo und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics "E.R. Caianiello", University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MiSE-ENEA bilateral program agreement, ENEA-NANO_MATES cooperating agreement.
Abstract (Originalsprache)
This study presents a novel approach to the development of high-performance supercapacitors through 3D printing technology. We synthesized a composite material consisting of silver-doped reduced graphene oxide (rGO) and dodecylbenzenesulfonic acid (DBSA)-doped polyaniline (PANI), which was further blended with polylactic acid (PLA) for additive manufacturing. The composite was extruded into filaments and printed into circular disc electrodes using fused deposition modeling (FDM). These electrodes were assembled into symmetric supercapacitor devices with a solid-state electrolyte. Electrochemical characterization, including cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) tests, demonstrated considerable mass-specific capacitance values of 136.2 F/g and 133 F/g at 20 mV/s and 1 A/g, respectively. The devices showed excellent stability, retaining 91% of their initial capacitance after 5000 cycles. The incorporation of silver nanoparticles enhanced the conductivity of rGO, while PANI-DBSA improved electrochemical stability and performance. This study highlights the potential of combining advanced materials with 3D printing to optimize energy storage devices, offering a significant advancement over traditional manufacturing methods.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics "E.R. Caianiello", University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy.
- NANO_MATES Research Centre, University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy.
- Nanomaterials and Devices Laboratory (SSPT-PROMAS-NANO), ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Piazzale E. Fermi 1, 80055 Portici, Italy.
ORCID-Profile: Claudia Cirillo, Davide Scarpa, Pierpaolo Iovane, Carmela Borriello, Maria Sarno
Förderung
- MiSE-ENEA bilateral program agreement
- ENEA-NANO_MATES cooperating agreement
Zitieren
APA
Cirillo, C., Iuliano, M., Scarpa, D., Iovane, P., Borriello, C., Portofino, S., Galvagno, S., & Sarno, M. (2024). Silver-Doped Reduced Graphene Oxide/PANI-DBSA-PLA Composite 3D-Printed Supercapacitors. Nanomaterials, 14(20), 1681. https://doi.org/10.3390/nano14201681
Vancouver
Cirillo C, Iuliano M, Scarpa D, Iovane P, Borriello C, Portofino S, et al. Silver-Doped Reduced Graphene Oxide/PANI-DBSA-PLA Composite 3D-Printed Supercapacitors. Nanomaterials. 2024;14(20):1681. doi:10.3390/nano14201681
BibTeX
@article{Cirillo2024,
author = {Cirillo, Claudia and Iuliano, Mariagrazia and Scarpa, Davide and Iovane, Pierpaolo and Borriello, Carmela and Portofino, Sabrina and Galvagno, Sergio and Sarno, Maria},
title = {Silver-Doped Reduced Graphene Oxide/PANI-DBSA-PLA Composite 3D-Printed Supercapacitors},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {20},
pages = {1681},
doi = {10.3390/nano14201681}
}
EUVIMED