EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Efficient Formaldehyde Gas Sensing Performance via Promotion of Oxygen Vacancy on In-Doped LaFeO3 Nanofibers

Lei Zhu, Jiaxin Zhang, Jianan Wang, Jianwei Liu, Wei Zhao, Wei Yan

Nanomaterials · 02.10.2024 · 14 (19) · 1595

DOI: 10.3390/nano14191595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 02.10.2024. Verfasst von Lei Zhu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Xi'an Key Laboratory of Solid Waste Resource Regeneration and Recycling, State Key Laboratory of Multiphase Flow Engineering, School of Energy and Po…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shaanxi Province, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite oxide LaFeO3(LFO) emerges as a potential candidate for formaldehyde (HCHO) detection due to its exceptional electrical conductivity and abundant active metal sites. However, the sensitivity of the LFO sensor needs to be further enhanced. Herein, a series of LaxIn1-xFeO3 (x = 1.0, 0.9, 0.8, and 0.7) nanofibers (LxIn1-xFO NFs) with different ratios of La/In were obtained via the electrospinning method followed by a calcination process. Among all these LxIn1-xFO NFs sensors, the sensor based on the L0.8In0.2FO NFs possessed the maximum response value of 18.8 to 100 ppm HCHO at the operating temperature of 180 °C, which was 4.47 times higher than that based on pristine LFO NFs (4.2). Furthermore, the L0.8In0.2FO NFs sensor also exhibited a rapid response/recovery time (2 s/22 s), exceptional repeatability, and long-term stability. This excellent gas sensing performance of the L0.8In0.2FO NFs can be attributed to the large number of oxygen vacancies induced by the replacement of the A-site La3+ by In3+, the large specific surface area, and the porous structure. This research presents an approach to enhance the HCHO gas sensing capabilities by adjusting the introduced oxygen vacancies through the doping of A-sites in perovskite oxides.

Schlagwörter

Stichwörter der Autor:innen

LaFeO3dopingformaldehyde detectionnanofibersoxygen vacancy

Autor:innen und Institutionen

  • Xi'an Key Laboratory of Solid Waste Resource Regeneration and Recycling, State Key Laboratory of Multiphase Flow Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
  • School of Physics and Electrical Engineering, Weinan Normal University, Chaoyang Street, Weinan 714099, China.
  • School of Chemistry and Chemical Engineering, Xi'an University of Science & Technology, Xi'an 710054, China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shaanxi Province
  • China Postdoctoral Science Foundation
  • Scientific Research Program Funded by Shaanxi Provincial Education Department
  • Shaanxi Province Postdoctoral Science Foundation
  • Shaanxi Provincial Education Department

Zitieren

APA

Zhu, L., Zhang, J., Wang, J., Liu, J., Zhao, W., & Yan, W. (2024). Efficient Formaldehyde Gas Sensing Performance via Promotion of Oxygen Vacancy on In-Doped LaFeO3 Nanofibers. Nanomaterials, 14(19), 1595. https://doi.org/10.3390/nano14191595

Vancouver

Zhu L, Zhang J, Wang J, Liu J, Zhao W, Yan W. Efficient Formaldehyde Gas Sensing Performance via Promotion of Oxygen Vacancy on In-Doped LaFeO3 Nanofibers. Nanomaterials. 2024;14(19):1595. doi:10.3390/nano14191595

BibTeX
@article{Zhu2024,
  author = {Zhu, Lei and Zhang, Jiaxin and Wang, Jianan and Liu, Jianwei and Zhao, Wei and Yan, Wei},
  title = {Efficient Formaldehyde Gas Sensing Performance via Promotion of Oxygen Vacancy on In-Doped LaFeO3 Nanofibers},
  journal = {Nanomaterials},
  year = {2024},
  volume = {14},
  number = {19},
  pages = {1595},
  doi = {10.3390/nano14191595}
}
Kostenlos starten →