Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors
Nanomaterials · 11.09.2024 · 14 (18) · 1477
DOI: 10.3390/nano14181477 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 11.09.2024. Verfasst von Zhao Li und 2 weiteren Autor:innen. Beteiligte Einrichtung: Security and Disruptive Technologies Portfolio, National Research Council Canada, 1200 Montreal Road, Ottawa, ON K1A 0R6, Canada. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The control of the performance of single-walled carbon nanotube (SWCNT) random network-based transistors is of critical importance for their applications in electronic devices, such as complementary metal oxide semiconducting (CMOS)-based logics. In ambient conditions, SWCNTs are heavily p-doped by the H2O/O2 redox couple, and most doping processes have to counteract this effect, which usually leads to broadened hysteresis and poor stability. In this work, we coated an SWCNT network with various common polymers and compared their thin-film transistors’ (TFTs’) performance in a nitrogen-filled glove box. It was found that all polymer coatings will decrease the hysteresis of these transistors due to the partial removal of charge trapping sites and also provide the stable control of the doping level of the SWCNT network. Counter-intuitively, polymers with electron-withdrawing functional groups lead to a dramatically enhanced n-branch in their transfer curve. Specifically, SWCNT TFTs with poly (vinylidene fluoride) coating show an n-type mobility up to 61 cm2/Vs, with a decent on/off ratio and small hysteresis. The inverters constructed by connecting two ambipolar TFTs demonstrate high gain but with certain voltage loss. P-type or n-type doping from polymer coating layers could suppress unnecessary n- or p-branches, shift the threshold voltage and optimize the performance of these inverters to realize rail-to-rail switching. Similar devices also demonstrate interesting antiambipolar performance with tunable on and off voltage when tested in a different configuration.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Security and Disruptive Technologies Portfolio, National Research Council Canada, 1200 Montreal Road, Ottawa, ON K1A 0R6, Canada.
Zitieren
APA
Li, Z., Ngai, J. H. L., & Ding, J. (2024). Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors. Nanomaterials, 14(18), 1477. https://doi.org/10.3390/nano14181477
Vancouver
Li Z, Ngai JHL, Ding J. Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors. Nanomaterials. 2024;14(18):1477. doi:10.3390/nano14181477
BibTeX
@article{Li2024,
author = {Li, Zhao and Ngai, Jenner H L and Ding, Jianfu},
title = {Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors},
journal = {Nanomaterials},
year = {2024},
volume = {14},
number = {18},
pages = {1477},
doi = {10.3390/nano14181477}
}
EUVIMED